Murata Power Solutions designs, manufactures and distributes DC-DC Converter , AC-DC Power Supply, Magnetic, Digital Panel Meter..
Murata Power Solutions
Showing all 3 results
-
Power Supplies
Murata Power Solutions MTU1D0512MC
The MTU2D0512MC is a 2-output 2W board-mount isolated DC/DC Converter with a footprint reduction of over 50% from the previous generations. The device is more efficient and offers improved regulation performance for applications where a wide output voltage variation cannot be tolerated. The device is pin compatible with the MTU2 series. The device is suitable for all applications where high volume production is envisaged.
- Patent protected
- Multi-layer ceramic capacitors
- 1kVDC Isolation hi pot test
- Footprint over pins 0.69cm²
- Power density 3.403W/cm³
- 11% Maximum load regulation
- 35mVp-p Maximum ripple and noise
- 85% Typical efficiency
- 19pF Isolation capacitance
- 880μs Start-up time
SKU: W002714 -
Power Supplies
Murata Power Solutions MTU1S0505MC
The MTU1S0505MC is a 1-output board-mount isolated SM DC to DC Converter with a footprint reduction of over 50% from the previous generation of 1W SMD DC/DC converter. The MTU1 series is more efficient and offers improved regulation performance for applications where a wide output voltage variation cannot be tolerated. The device is suitable for all applications where high volume production is envisaged.
- Patent protected
- Footprint over pins 0.69cm²
- 1kVDC Isolation ‘Hipot Test’
- Efficiency up to 88% typical
- 1.7W/cm³ Power density
- Toroidal magnetics
- Multi-layer ceramic capacitors
- -40 to +85°C Wide operating temperature range
SKU: W004185 -
Power Supplies
Murata Power Solutions OKL-T/6-W12N-C
The OKL-T/6-W12 series are miniature non-isolated PoL SMT DC/DC Power Converters for embedded applications. Featuring inspectable Land Grid Array ( iLGA) format, the OKL-T/6-W12N-C measures only 12.2 x 12.2 x 7.2mm maximum. Based on fixed-frequency synchronous buck converter switching topology, the high power conversion efficient point-of-load (PoL) module features programmable output voltage and on/off control. This converter also include under-voltage lock out (UVLO), output short-circuit protection and over-current protections. An optional sequence/tracking feature on OKL-T/6-W12N-C allows power sequencing of PoLs.
- iLGA inspectable Land Grid Array
- Programmable output voltage from 0.591 to 5.5VDC
- Drives up to 300μF ceramic capacitive loads
- High power conversion efficiency at 93%
- Outstanding thermal derating performance
- Short-circuit and over-current protection
- On/off control and power good signal
SKU: W007273