The MIL-DTL-38999 Series I & II high-performance Cylindrical Connector with low-profile 3-point bayonet coupling. It is designed for cable-to-panel I/O applications in military aerospace and other demanding situations. Environmental class plugs and receptacles with high-density insert arrangements – are available with crimp removable contacts, PC tails and solder cups. Glenair manufactures a wide range of environmental class MIL-DTL-38999 type connector including lanyard-release products, composite and specialty metal cable plugs and receptacles and coax contact equipped products. It is also designed for use in pressurized or severe environmental applications. Hermeticity is generally defined as the state or condition of being air or gas tight. In interconnect in dielectric breakdown, corrosion and loss of insulation resistance between conductors. The classic hermetic application is a receptacle feed-through penetrating a pressurized bulkhead or pressurized equipment housing.

• Low shell-to-shell resistance
• Non-magnetic
• Cadmium free
• Low coefficient of friction
• Hexavalent chromium free
• Potassium formate resistant
• Maximum 2.5mV drop potential
• 500+ Mating cycles
• Low out gassing
• 336hr Sulphur dioxide resistance
• -55 to 175°C Temperature range

The D38999/26FC35PN from Deutsch is MIL-DTL-38999 Series III straight plug with 22 contacts. MIL-DTL-38999 Series III connectors are available in wide range of shell materials and finishes with 48, 500, 1000 and 2000 hour salt spray plating exposure. These connectors offer high density contact arrangements in a miniature circular shell and combines high coupling durability. It is designed to withstand the extreme shock, exposure and vibration.

• High reliability, moisture and corrosion resistant
• Outstanding EMI, RFI shielding protection
• 500 mating cycles, high durability versions are available with 1500 mating cycles
• Operates at extreme temperature range of -65°C to +200°C
• Minimum insulation resistance is 5000Mohm (under 500VDC)
• Scoop proof to eliminate the possibility of contact damage
• IP67 environmental protection
• Self locking connector system, triple start threaded coupling
• Aluminium alloy body material with electroless nickel plating
• Copper alloy crimp pin contacts with gold plating

The M85049/38-15N is a straight Strain Relief Clamp for connector family L, size-15/D connector shell and electroless nickel finish, to meet AS85049 requirements. Strain reliefs not only tidy-up the cable after termination but provide good strain relief at the termination area. It is a cost effective cable holding option when environmental protection is not a concern and weight saving is a major consideration.

• Provides strain relief and cable tidy
• No environmental protection offered
• Alternative to Polamco 96H/97H1 series