| Positive Supply Voltage | 4.00 V (min) |
|---|---|
| Number of Pins | 8 |
| REACH SVHC Compliance | No SVHC |
| RoHS | Compliant |
| Supply Current | 200 µA |
| Slew Rate | 1.40 V/μs |
| Packaging | Tube |
| Operating Temperature | -40.0 °C to 85.0 °C |
| Case/Package | SOIC |
| Bandwidth | 1.00 MHz |
| Common Mode Rejection Ratio | 80.0 dB |
| Lead-Free Status | Contains Lead |
| Mounting Style | Surface Mount |
| Lifecycle Status | Active |
Amplifiers & Comparators
| Manufacturer | Analog Devices |
|---|---|
| Manufacturer Part Number | AD8278ARZ |
| Description | Amplifier Single ±18V/36V 8-Pin SOIC |
| Stock Code | W003477 |
| Download |  Technical Datasheet |
The AD8278 and AD8279 are general-purpose difference amplifiers intended for precision signal conditioning in power critical applications that require both high performance and low power. The AD8278 and AD8279 provide exceptional commonmode rejection ratio (80 dB) and high bandwidth while amplifying input signals that are well beyond the supply rails. The on-chip resistors are laser trimmed for excellent gain accuracy and high CMRR. They also have extremely low gain drift vs. temperature.
The common-mode range of the amplifier extends to almost triple the supply voltage (for G = ½), making the amplifer ideal for single-supply applications that require a high commonmode voltage range. The internal resistors and ESD circuitry at the inputs also provide overvoltage protection to the op amp. The AD8278 and AD8279 can be used as difference amplifiers with G = ½ or G = 2. They can also be connected in a high precision, single-ended configuration for non inverting and inverting gains of −½, −2, +3, +2, +1½, +1, or +½.
The AD8278 and AD8279 provide an integrated precision solution that has a smaller size, lower cost, and better performance than a discrete alternative.
Related products
-
Amplifiers & Comparators
Texas Instruments TLV3704IPWR
Comparator General Purpose CMOS, Push-Pull, Rail-to-Rail 14-TSSOP
The TLV370x is Texas Instruments’ first family of nanopower comparators with only 560 nA per channel supply current, which make this device ideal for battery power and wireless handset applications. The TLV370x has a minimum operating supply voltage of 2.7 V over the extended industrial temperature range (TA = –40°C to 125°C), while having an input common-mode range of –0.1 to VCC + 5 V. The low supply current makes it an ideal choice for battery-powered portable applications where quiescent current is the primary concern.
Reverse battery protection guards the amplifier from an overcurrent condition due to improper battery installation. For harsh environments, the inputs can be taken 5 V above the positive supply rail without damage to the device.
All members are available in PDIP and SOIC with the singles in the small SOT-23 package, duals in the MSOP, and quads in the TSSOP package.
SKU: W023526 -
Amplifiers & Comparators
Analog Devices / Linear Technology LTC1540IMS8#PBF
The LTC1540IMS8#PBF is an ultralow nano-power single Comparator with built-in reference. The comparator features include less than 0.6µA supply current over the commercial temperature range, a 1.182V±2% reference, programmable hysteresis and TTL/CMOS outputs that sink and source current. The reference output can drive a bypass capacitor of up to 0.01µF without oscillation. The comparator operates from a single 2 to 11V supply or a dual ±1 to ±5.5V supply. Comparator hysteresis is easily programmed by using two resistors and the HYST pin. The comparator input operates from the negative supply to within 1.3V of the positive supply. The comparator output stage can continuously source up to 40mA. By eliminating the cross-conducting current that normally occur when the comparator changes logic states, power supply glitches are eliminated.
- Reference output drives 0.01µF capacitor
- Input voltage range includes the negative supply
- Reference output sources Up to 1mA
- 60µs Propagation delay with 10mV overdrive
- No crowbar current
- 40mA Continuous source current
- Pin-compatible with LTC1440, MAX921, MAX931
- LTADV Part marking
SKU: W000351 -
Amplifiers & Comparators
Analog Devices / Linear Technology LTC6090HS8E
The LTC6090HS8E#PBF is a high voltage precision monolithic Operational Amplifier for use with high voltage regulators. The LTC6090 is unity gain stable. The LTC6090-5 is stable in noise gain configurations of 5 or greater. Amplifier feature high open loop gain, low input referred offset voltage and noise, pA input bias current and ideal for high voltage, high impedance buffering and/or high gain configurations. The amplifier is internally protected against over-temperature conditions. A thermal warning output, TFLAG, goes active when the die temperature approaches 150°C. The output stage may be turned off with the output disable pin OD. By tying the OD pin to the thermal warning output (TFLAG), the part will disable the output stage when it is out of the safe operating area. These pins easily interface to any logic family. Amplifier may be run from a single 140V or spit ±70V power supplies and are capable of driving up to 200pF of load capacitance.
- ±4.75 to ±70V (140V) Supply range
- 50pA Maximum input bias current
- 1.25mV Maximum low offset voltage
- ±5μV/°C Maximum low offset drift
- 130dB Minimum CMRR
- Rail-to-rail output stage
- 50mA Output sink and source
- 11nV/√Hz Noise density
- Thermal shutdown
SKU: W023614 -
Amplifiers & Comparators
Microchip MCP6292-E/MS
The MCP6292-E/MS is a 10MHz rail-to-rail Operational Amplifier provides wide bandwidth for the current. It features a gain bandwidth product (GBWP) and a 65° phase margin. This family also operates from a single supply voltage as low as 2.4V, while drawing 1mA (typical) quiescent current. Additionally, the MCP6291 supports rail-to-rail input and output swing, with a common mode input voltage range of +300mV VDD to -300mV VSS. This family of operational amplifiers is designed with an advanced CMOS process.
- ±3mV Maximum input offset voltage
- 65dB (typical) Common mode rejection ratio
- 70dB Typical power supply rejection ratio
SKU: W022806 -
Amplifiers & Comparators
Broadcom HCPL-7800-000E
The HCPL-7800-000E is an Isolation Amplifier for current sensing in electronic motor drives. The high CMR capability of isolation amplifier provides the precision and stability needed to accurately monitor motor current in high noise motor control environments, providing for smoother control in various types of motor control applications. In a typical implementation the motor current flows through an external resistor and the resulting analogue voltage drop is sensed by the amplifier. A differential output voltage is created on the other side of the amplifier optical isolation barrier. It is designed to ignore very high common-mode transient slew rates.
- 15kV/µs Common-mode rejection at VCM = 1000V
- Advanced sigma-delta A/D converter technology
- Compact and auto-insertable
- Fully differential circuit topology
SKU: W003181
