| Mounting Style | Surface Mount |
|---|---|
| Number of Pins | 20 |
| RoHS | Compliant |
| Lifecycle Status | Active |
| Case/Package | TSSOP |
| Lead-Free Status | Contains Lead |
Power Management ICs - PMIC
| Manufacturer | Analog Devices / Linear Technology |
|---|---|
| Manufacturer Part Number | LT3741IFE#PBF |
| Description | IC REG CTRLR BUCK PWM CM 20TSSOP |
| Stock Code | W000350 |
| Download |  Technical Datasheet |
The LT®3741 and LT3741-1 are fixed frequency synchronous step-down DC/DC controllers designed to accurately regulate the output current at up to 20A. The average currentmode controller will maintain inductor current regulation over a wide output voltage range of 0V to (VIN – 2V). The regulated current is set by an analog voltage on the CTRL pins and an external sense resistor. Due to its unique topology, the LT3741 is capable of sourcing and sinking current. If sinking current is not required, or for parallel applications, use the LT3741-1.
The regulated voltage and overvoltage protection are set with a voltage divider from the output to the FB pin. Soft-Start is provided to allow a gradual increase in the regulated current during startup. The switching frequency is programmable from 200kHz to 1MHz through an external resistor on the RT pin or through the use of the SYNC pin and an external clock signal.
Related products
-
Power Management ICs - PMIC
Texas Instruments LM317AEMP
The LM317AEMP/NOPB is an adjustable 3-terminal positive Voltage Regulator is capable of supplying in excess of 1.5A over a 1.2 to 37V output range. It is exceptionally easy to use and require only two external resistors to set the output voltage. Further, both line and load regulations are better than standard fixed regulators. In addition to higher performance than fixed regulators, the LM317AEMP/NOPB series offers full overload protection available only in IC’s. Included on the chip are current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional even if the adjustment terminal is disconnected.
- Specified 1% Output Voltage Tolerance
- Specified Maximum 0.01%/V Line Regulation
- Specified 1.5A Output Current
- Adjustable Output Down to 1.2V
- Current Limit Constant with Temperature
- P+ Product Enhancement Tested
- 80dB Ripple Rejection
- Output is Short-circuit Protected
- Green Product, No Sb/Br
SKU: W001862 -
Power Management ICs - PMIC
STMicroelectronics VND600SP-E
The VND600SP-E is a monolithic 2-channel high side Solid State Relay intended for driving resistive or inductive loads with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes. Built-in thermal shutdown and outputs current limitation protect the chip from over temperature and short circuit. Device turns-off in case of ground pin disconnections.
- Very low standby current
- CMOS compatible input
- Proportional load current sense
- Current sense disable
- Thermal shutdown protection and diagnosis
- Under voltage shutdown
- Overvoltage clamp
- Load current limitation
SKU: W001015 -
Power Management ICs - PMIC
Analog Devices / Linear Technology LT3012BEFE#PBF
The LT® 3012B is a high voltage, micropower low dropout linear regulator. The device is capable of supplying 250mA of output current with a dropout voltage of 400mV. Designed for use in battery-powered or high voltage systems, the low quiescent current (40µA operating) makes the LT3012B an ideal choice. Quiescent current is also well controlled in dropout.
Other features of the LT3012B include the ability to operate with very small output capacitors. The regulators are stable with only 3.3µF on the output while most older devices require between 10µF and 100µF for stability. Small ceramic capacitors can be used without any need for series resistance (ESR) as is common with other regulators. Internal protection circuitry includes reverse-battery protection, current limiting, thermal limiting and reverse current protection.
The device is available with an adjustable output with a 1.24V reference voltage. The LT3012B regulator is available in the 16-lead TSSOP and 12 pin low profile (0.75mm) (4mm × 3mm) DFN packages with an exposed pad for enhanced thermal handling capability.
- Wide Input Voltage Range: 4V to 80V
- Low Quiescent Current: 40µA
- Low Dropout Voltage: 400mV
- Output Current: 250mA
- No Protection Diodes Needed
- Adjustable Output from 1.24V to 60V
- Stable with 3.3µF Output Capacitor
- Stable with Aluminum, Tantalum or Ceramic Capacitors
- Reverse-Battery Protection
- No Reverse Current Flow from Output to Input
- Thermal Limiting
- Thermally Enhanced 16-Lead TSSOP and 12-Pin(4mm × 3mm) DFN Packages
SKU: W002018 -
Power Management ICs - PMIC
Texas Instruments LP3853ES-2.5/NOPB
The LP3853/LP3856 series of fast ultra low-dropout linear regulators operate from a +2.5V to +7.0V input supply. Wide range of preset output voltage options are available. These ultra low dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low voltage microprocessor applications. The LP3853/LP3856 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3853/LP3856 to operate under extremely low dropout conditions.
SKU: W006995 -
Power Management ICs - PMIC
Texas Instruments REF3012AIDBZT
The REF3012AIDBZT is a 1.25V 50ppm/°C 50µA (band gap) Voltage Reference with small size and low power consumption make it ideal for portable and battery-powered applications. The REF30xx does not require a load capacitor, but is stable with any capacitive load. Unloaded, the REF30xx can be operated with supplies within 1mV of output voltage.
- 1mV Low dropout
- Excellent specified drift performance
- 25mA High output current
- 0.2% High accuracy
- 50µA Low IQ
- Green product and no Sb/Br
SKU: W017051
