The P6KE6.8A is an axial leaded unidirectional Transient Voltage Suppressor (TVS) Diode with lead-free matte tin-plated terminal and a molded plastic body. The P6KE series TVS is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. The TVS device is ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom.

• Glass passivated chip junction
• Excellent clamping capability
• Low incremental surge resistance
• Typical failure mode is short from over-specified voltage or current
• Halogen-free
• 10mA Test current
• 1000µA at 5.80V Maximum reverse leakage current

The SMCJ series surface-mount Transient Voltage Suppression Diode designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. It is ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits. It is used for surface mounted applications in order to optimize board space.

• 1500W Peak pulse power capability at 10/1000μs waveform
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Excellent clamping capability
• 0.05% Repetition rate (duty cycle)
• <1ps from 0V to V(BR) Minimum fast response time
• <1μA above 10V Current IR
• Available in unidirectional and bidirectional
• ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2)
• EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4)
• -65 to 150°C Operating temperature range

The TRANSZORB 5KP series Transient Voltage Suppressor Diode offers 5000W peak pulse power capability with a 10/1000μs waveform, 0.01% repetitive rate (duty cycle). It is used in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET and signal lines of sensor units.

• P600 glass passivated chip junction
• Available in unidirectional polarity
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• -55 to 175°C Operating junction temperature range