RoHS | Non-Compliant |
---|---|
Contact Plating | Cadmium |
Manufacturer | Glenair |
---|---|
Manufacturer Part Number | M85049/49-2-18W |
Description | CIRCULAR BACKSHELL SR ST OD CAD SIZE 18 |
Stock Code | W009117 |
Download | ![]() |
The MIL-DTL-38999 Series I & II high-performance Cylindrical Connector with low-profile 3-point bayonet coupling. It is designed for cable-to-panel I/O applications in military aerospace and other demanding situations. Environmental class plugs and receptacles with high-density insert arrangements – are available with crimp removable contacts, PC tails and solder cups. Glenair manufactures a wide range of environmental class MIL-DTL-38999 type connector including lanyard-release products, composite and specialty metal cable plugs and receptacles and coax contact equipped products. It is also designed for use in pressurized or severe environmental applications. Hermeticity is generally defined as the state or condition of being air or gas tight. In interconnect in dielectric breakdown, corrosion and loss of insulation resistance between conductors. The classic hermetic application is a receptacle feed-through penetrating a pressurized bulkhead or pressurized equipment housing.
- Low shell-to-shell resistance
- Non-magnetic
- Cadmium free
- Low coefficient of friction
- Hexavalent chromium free
- Potassium formate resistant
- Maximum 2.5mV drop potential
- 500+ Mating cycles
- Low out gassing
- 336hr Sulphur dioxide resistance
Related products
- Circular Connectors & Components
Amphenol MS3126F12-10P
0 out of 5(0)The MS3126F12-10P is a 10-contact Circular Connector with gold-plated contacts, straight plug, 12-10 insert arrangement, pin contact. The crimp type miniature connector provides performance and versatility needed for applications demanding high reliability and crimp removable contacts. These crimp contacts are rear insertable/front release and are held in position by an MS approved spring tower retention system. Shell components for these series are aluminum. The dependable 5-key/keyway polarization with bayonet lock coupling assures positive mating with no chance of cross plugging. Spring tension provided by a wave washer in the coupling nut ensures maintenance of interfacial seal between mating halves.
- Designates environmental resisting connector with strain relief
- Resilient inserts which provide high dielectric strength and moisture barrier
- Corrosion-resistant
- Both insert and main joint gasket are molded from resilient neoprene
- Provides excellent moisture sealing at gasket
- Superior electrical isolation of contact in insert
- 1000VAC RMS (at sea level) Operating voltage
- -55 to +125° Operating temperature
SKU: W005306 - Circular Connectors & Components
PCD M85049/38-11N
0 out of 5(0)The M85049/38-11N is a straight Strain Relief Clamp for use with connector family L, includes MIL-DTL-38999 series III and series IV. The strain relief clamp when environmental protection is not a concern and weight savings is a major consideration. Secures and tidy-ups the cable and also provides good strain relief at the termination area.
- Electroless nickel finish
- Non self-lock coupling
SKU: W007350 - Circular Connectors & Components
PCD M85049/38-21N
0 out of 5(0)The M85049/38-21N is a straight Strain Relief Clamp for connector family L, size-21/G connector shell and electroless nickel finish, to meet AS85049 requirements. Strain reliefs not only tidy-up the cable after termination but provide good strain relief at the termination area. It is a cost effective cable holding option when environmental protection is not a concern and weight saving is a major consideration.
- Provides strain relief and cable tidy
- No environmental protection offered
- Alternative to Polamco 96H/97H1 series
SKU: W007309 - Circular Connectors & Components
PCD M85049/38-25N
0 out of 5(0)The M85049/38-25N is a straight Strain Relief Clamp for connector family L, size-25/J connector shell and electroless nickel finish, to meet AS85049 requirements. Strain reliefs not only tidy-up the cable after termination but provide good strain relief at the termination area. It is a cost effective cable holding option when environmental protection is not a concern and weight saving is a major consideration.
- Provides strain relief and cable tidy
- No environmental protection offered
- Alternative to Polamco 96H/97H1 series
SKU: W007352 - Circular Connectors & Components
PCD M85049/52-1-14W
0 out of 5(0)The M85049/52-1-14W is a straight Strain Relief Clamp for connector family J, non self-lock for 90° coupling, size-12/14 connector shell and cadmium olive drab over electroless nickel finish, to meet AS85049 requirements. Strain reliefs not only tidy-up the cable after termination but provide good strain relief at the termination area. It is a cost effective cable holding option when environmental protection is not a concern and weight saving is a major consideration.
- Provides strain relief and cable tidy
- No environmental protection offered
- Alternative to Polamco 96H/97H1 series
SKU: W007353