Manufacturer KEMET
Manufacturer Part Number C1210F225K5RAC-TU
Description Capacitor 1210 50V 2.2uF.
Stock Code W004130
Download Technical Datasheet

The F or J series ceramic Open Mode Capacitor in X7R dielectric are designed to minimize the probability of a low IR or short-circuit condition when forced to failure in a board stress flex situation. The open mode capacitor may experience a drop in capacitance, however, a short is unlikely because a crack will not typically propagate across counter electrodes within the device’s active area. Since there will not be any current leakage associated with a typical open mode flex crack, there is no localized heating and therefore little chance for a catastrophic and potentially costly failure event. Driven by the demand for a more robust and reliable component, the open mode capacitor was designed for critical applications where higher operating temperatures and mechanical stress are a concern. These capacitors are widely used in automotive circuits and general electronic applications.

  • Open mode/fail open design
  • Mid to high capacitance flex mitigation
  • Non-polar device, minimizing installation concerns
  • Capacitance offerings ranging from 1000pF to 6.8μF
  • EIA 0805, 1206, 1210 and 1812 case sizes available
  • DC voltage ratings of 16, 25, 50, 100 and 200V
  • Available capacitance tolerances of ±5%, ±10% and ±20%
  • 100% Pure matte tin-plated termination finish allowing for excellent solderability

Operating Temperature

-55.0 °C to 125 °C

Number of Pins

2

REACH SVHC Compliance

No SVHC

Voltage Rating (DC)

50.0 V

Packaging

Cut Tape (CT)

RoHS

Compliant

Mounting Style

Surface Mount

Lead-Free Status

R

Case/Package

1210

Capacitance Tolerance

±10%

Dielectric Characteristic

X7R

Dielectric Material

Ceramic

Capacitance

2.20 µF