Size-Height | 10.0 mm |
---|---|
Mounting Style | Through Hole |
Number of Outputs | 1 |
Isolation Voltage | 1.00 kV |
Output Current | 200 mA |
Flammability Rating | UL 94 V-0 |
Input Voltage (DC) | 4.50 V to 5.50 V |
Output Power | 1.00 W (max) |
Power Rating | 1.00 W |
RoHS | Compliant |
Size-Width | 6.00 mm |
REACH SVHC Compliance | No SVHC |
Output Voltage | 5.00 V |
Supply Voltage (DC) | 5.00 V |
Packaging | Tube |
Lead-Free Status | Lead Free |
Manufacturer | Murata Power Solutions |
---|---|
Manufacturer Part Number | NME0505SC |
Description | DC DC Converter Input 4.5V-5.5V Output 5V 200mA |
Stock Code | W000006 |
Download | ![]() |
The NME0505SC from Murata is an isolated, 1W, single output DC to DC converter in SIP package. It is particularly suited to isolate or converting DC power rails. The galvanic isolation allows the device to configure an isolated negative rail in systems where only positive rails exist.
The NME series of DC-DC Converters is particularly suited to isolating and/or converting DC power rails. The galvanic isolation allows the device to be configured to provide an isolated negative rail in systems where only positive rails exist. The wide temperature range guarantees startup from –40°C and full 1 watt output at 85°C2 . For lower ripple, refer to output ripple reduction section.
The NME series offers short circuit protection options (PC) across the operating temperature range. Short circuits of less than 1Ω cause the converter to enter a ‘foldback’ limiting mode such that the input current is approximately 95mA for 0505 variant. Protection is continuous and auto-resetting on removal of the short circuit
Related products
- Power Supplies
Vicor VI-JT3-EX
0 out of 5(0)The VI-J00 MiniMod family established a new standard in component-level DC-DC converters. This “junior” size complement to the higher power VI-200 family offers up to 100W of isolated and regulated power in a board mounted package. With thousands of input/output/power combinations, and with a maximum operating temperature rating of 100°C, the MiniMod provides nearly unlimited flexibiliy for power system designers to meet demanding time to market requirements.
Utilizing Vicor’s “zero-current-switching” forward converter technology, proven by an installed base of over 8 million units, the MiniMod family combines state of the art power density with the
SKU: W005262 - Power Supplies
TDK-Lambda DPP50-24
0 out of 5(0)The DPP50-24 is a 24V/50W 1-output DIN-rail mount Power Supply features a compact size universal input, convection cooled, greater than 120% over-current protection 125 to 137.5%, cycle AC line to reset overvoltage protection. This power supply supports global use, easier system configuration and integration. This power supply output is fixed and can be adjustable.
- <50mV (20MHz bandwidth) Ripple/noise
- 86% Efficiency
- >20ms Hold-up time (115VAC input)
- -10 to 71°C Operating temperature range
SKU: W005193 - Power Supplies
Vicor VI-J43-CX
0 out of 5(0)A range of board-mount AC front-end modules is available for the design of a full AC-DC power system. Global, autoranging input ranges are available from 85 to 264 Vac at 47 to 63 Hz.
The isolated, power factor corrected devices integrate EMI/RFI filtering, transient protection, short circuit protection and inrush limiting to simplify design. These building block components enable high-density power solutions (from 330 W to 1500 W), meeting necessary worldwide standards, including compliance to EMC standards for harmonic currents, line disturbance and transient conducted emissions.
SKU: W003133 - Power Supplies
Murata Power Solutions OKL-T/6-W12N-C
0 out of 5(0)The OKL-T/6-W12 series are miniature non-isolated PoL SMT DC/DC Power Converters for embedded applications. Featuring inspectable Land Grid Array ( iLGA) format, the OKL-T/6-W12N-C measures only 12.2 x 12.2 x 7.2mm maximum. Based on fixed-frequency synchronous buck converter switching topology, the high power conversion efficient point-of-load (PoL) module features programmable output voltage and on/off control. This converter also include under-voltage lock out (UVLO), output short-circuit protection and over-current protections. An optional sequence/tracking feature on OKL-T/6-W12N-C allows power sequencing of PoLs.
- iLGA inspectable Land Grid Array
- Programmable output voltage from 0.591 to 5.5VDC
- Drives up to 300μF ceramic capacitive loads
- High power conversion efficiency at 93%
- Outstanding thermal derating performance
- Short-circuit and over-current protection
- On/off control and power good signal
SKU: W007273