| Number of Pins | 3 |
|---|---|
| REACH SVHC Compliance | No SVHC |
| RoHS | Compliant |
| Packaging | Cut Tape (CT) |
| Operating Voltage | 24.0 V |
| Operating Temperature | 150 °C (max) |
| Case/Package | SOT-23 |
| Mounting Style | Surface Mount |
| Breakdown Voltage | 27.8 V |
ESD Protection Devices
| Manufacturer | Nexperia |
|---|---|
| Manufacturer Part Number | PESD1CAN |
| Description | ESDDIO 24V BIDIREC SOT 23 |
| Stock Code | W000480 |
| Download |  Technical Datasheet |
The PESD1CAN,215 is an ESD Protection Diode designed to protect two automotive Controller Area Network (CAN) bus lines from the damage caused by Electrostatic Discharge (ESD) and other transients. The device can be used for both, high-speed CAN bus and fault-tolerant CAN bus protection. The PESD1CAN provides a surge capability of up to 200W per line for an 8/20μs waveform.
- <1nA Ultra low leakage current
- ESD protection up to 23kV
- 24V Maximum reverse standoff voltage
Related products
-
ESD Protection Devices
Semtech SRV05-4.TCT
The SRV05-4.TCT is a surge-rated transient Voltage Suppressor (TVS) Diode Array, designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data and transmission lines from overvoltage caused by electrostatic discharge (ESD), electrical fast transients (EFT) and lightning. During transient conditions, the steering diodes direct the transient to either the positive side of the power supply line or to ground. The internal TVS diode prevents overvoltage on the power line, protecting any down-stream components.
- ESD Protection for High-speed Data Lines to IEC 61000-4-2 (ESD) ± 15kV (Air)
- Array of Surge Rated Diodes with Internal TVS Diode
- Small Package Saves Board Space
- Protects Four I/O Lines
- 3pF Typical Low Capacitance
- Low Clamping Voltage
- Solid-state Silicon-avalanche Technology
SKU: W000262 -
ESD Protection Devices
Semtech RCLAMP0504M.TBT
The RCLAMP0504M.TBT is a RailClamp® low capacitance TVS Diode Array designed to protect high speed data interfaces. The device has been specifically designed to protect sensitive components which are connected to data and transmission lines from overvoltage caused by ESD (electrostatic discharge), EFT (electrical fast transients) and lightning. The unique design of the device incorporates four surge rated, low capacitance steering diodes and a TVS diode. During transient conditions, the steering diodes direct the transient to either the positive side of the power supply line or to ground. The internal TVS diode prevents over-voltage on the power line, protecting any downstream components. It has a low typical capacitance of 3pF and operates with virtually no insertion loss to 1GHz. This makes the device ideal for protection of high-speed data lines such as USB 2.0, FireWire and DVI interfaces.
- ESD protection for high-speed data lines to IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact)
- IEC 61000-4-5 (Lightning) 12A (8/20µs)
- IEC 61000-4-4 (EFT) 40A (5/50ns)
- Array of surge rated diodes with internal TVS diode
- Protects four I/O lines and one Vcc line
- 3pF Capacitance
- Solid-state silicon-avalanche technology
- -55 to 125°C Operating temperature range
SKU: W004308
