| Output Voltage | 5.00 V, 5.00 V (max) |
|---|---|
| Number of Outputs | 1 |
| Operating Temperature | -40.0 °C (min) |
| Mounting Style | Through Hole |
| Lifecycle Status | Obsolete |
| Lead-Free Status | Contains Lead |
| Case/Package | SIP |
| Current Rating | 1.50 A |
| Frequency | 700 kHz (max) |
| Output Power | 7.50 W (max) |
| RoHS | Compliant |
| Weight | 6.50 g |
| Supply Voltage (DC) | 7.00 V (min) |
| Topology | Buck |
| Size-Width | 22.9 mm |
| Size-Length | 23.9 mm |
| Size-Height | 7.87 mm |
| Packaging | Cut Tape (CT) |
| Number of Pins | 3 |
| Output Current | 1.50 A |
Power Management ICs - PMIC
| Manufacturer | Texas Instruments |
|---|---|
| Manufacturer Part Number | 78SR105HC |
| Description | DC/DC Converter, 1 Output, 5 V, 1.5 A |
| Stock Code | W002899 |
| Download |  Technical Datasheet |
Non-Isolated Step-Down (Buck) Power Modules, PTN, PTR, PTV, TPS Series, Texas Instruments
A range of PCB-mounting Step-down (Buck) switching voltage regulator modules from Texas Instruments. These products offer highly efficient space-saving solutions for low-power step-down DC-DC applications where isolation is not required.
Related products
-
Power Management ICs - PMIC
Texas Instruments TPS2551QDBVRQ1
The TPS2551QDBVRQ1 is a Power Distribution Switch intended for applications in which heavy capacitive loads and short circuits are likely to be encountered. The current-limit threshold is user adjustable between 100mA and 1.1A via an external resistor. The power-switch rise and fall times are controlled to minimize current surges during switching. The device limits the output current to a desired level by switching into a constant-current mode when the output load exceeds the current-limit threshold or a short is present. An internal reverse-voltage detection comparator disables the power-switch in the event that the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT logic output asserts low during both overcurrent and reverse-voltage conditions.
- 2µS Typical fast overcurrent response
- Reverse input-output voltage protection
- Deglitched fault report
- 1µA Maximum standby supply current
SKU: W000342 -
Power Management ICs - PMIC
Infineon BTS50085-1TMB
N channel vertical power FET with charge pump, current controlled input and diagnostic feedback with load current sense, integrated in Smart SIPMOS chip on chip technology. Providing embedded protection functions.
- Power switch with current sense diagnostic feedback for up to 48V DC grounded loads
- Most suitable for loads with high inrush current like lamps and motors; all types of resistive and inductive loads
- Replaces electromechanical relays, fuses and discrete circuits
SKU: W000332 -
Power Management ICs - PMIC
Texas Instruments LM338T/NOPB
The LM338T/NOPB is an adjustable 3-terminal positive Voltage Regulator, capable of supplying in excess of 5A over a 1.2 to 32V output range. They are exceptionally easy to use and require only 2 resistors to set the output voltage. Careful circuit design has resulted in outstanding load and line regulation-comparable to many commercial power supplies. A unique feature of the LM338T/NOPB family is time-dependent current limiting. The current limit circuitry allows peak currents of up to 12A to be drawn from the regulator for short periods of time. This allows the LM338T/NOPB to be used with heavy transient loads and speeds start-up under full-load conditions. Under sustained loading conditions, the current limit decreases to a safe value protecting the regulator.
- Specified Thermal Regulation
- Current Limit Constant with Temperature
- P+ Product Enhancement Tested
- Output is Short-circuit Protected
- Green Product, No Sb/Br
SKU: W000346 -
Power Management ICs - PMIC
Analog Devices LTC4357MPMS8#PBF
The LTC®4357 is a positive high voltage ideal diode controller that drives an external N-channel MOSFET to replace a Schottky diode. When used in diode OR and high current diode applications, the LTC4357 reduces power consumption, heat dissipation, voltage loss and PC board area. The LTC4357 easily ORs power sources to increase total system reliability.
In diode-OR applications, the LTC4357 controls the forward voltage drop across the MOSFET to ensure smooth current transfer from one path to the other without oscillation. If the power source fails or is shorted, a fast turn-off minimizes reverse current transients.
SKU: W000349 -
Power Management ICs - PMIC
Texas Instruments TPS73701DCQ
The TPS73701DCQ is a linear low-dropout (LDO) Voltage Regulator uses an NMOS pass element in a voltage-follower configuration. This topology is relatively insensitive to output capacitor value and ESR, allowing a wide variety of load configurations. Load transient response is excellent, even with a small 1µF ceramic output capacitor. The NMOS topology also allows very low dropout. This device uses an advanced BiCMOS process to yield high precision while delivering very low dropout voltages and low ground pin current. Current consumption, when not enabled, is less than 20nA and ideal for portable applications. This device is protected by thermal shutdown and fold-back current limit. It features reverse current blockage and freedom from output capacitor constraints. These features combined with an enable input makes the device ideal for portable applications.
- Thermal shutdown and current limit for fault protection
- Excellent load transient response-even with only 1µF output capacitor
- 1% Initial accuracy
- 3% Overall accuracy over line, load and temperature
- Less than 20nA typical IQ in shutdown mode
- Green product and no Sb/Br
SKU: W000341
