| Output Current | 700 mA, 700 mA |
|---|---|
| Lead-Free Status | Lead Free |
| Mounting Style | Surface Mount |
| Number of Outputs | 1 |
| Lifecycle Status | Active |
| Dropout Voltage | 10.0 V |
| Input Voltage (DC) | 150 V (max) |
| Number of Regulated Outputs | 1 |
| Output Capacitor Type | Capacitor Free |
| Operating Temperature | 0.00 °C to 125 °C |
| Quiescent Current | 15.0 mA |
| REACH SVHC Compliance | No SVHC |
| Output Voltage | 1.25 V (min), 125 V (max) |
| RoHS | Compliant |
| Number of Pins | 3 |
| Packaging | Cut Tape (CT), Reel, Tape & Reel (TR) |
| Case/Package | TO-263 |
Power Management ICs - PMIC
| Manufacturer | Texas Instruments |
|---|---|
| Manufacturer Part Number | TL783CKTTR |
| Description | IC REG LDO ADJ 0.7A DDPAK |
| Stock Code | W005252 |
| Download |  Technical Datasheet |
The TL783CKTTR is a 3-pin 750mA adjustable positive Voltage Regulator with 125VIN. The TL783 device is an adjustable three-terminal high-voltage regulator with an output range of 1.25 to 125V and a DMOS output transistor capable of sourcing more than 700mA. It is designed for use in high-voltage applications where standard bipolar regulators cannot be used. Excellent performance specifications, superior to those of most bipolar regulators, are achieved through circuit design and advanced layout techniques.
- Full short-circuit safe operating area and thermal shutdown protection
- 0.001%/V Typical input voltage regulation
- 0.15% Typical output voltage regulation
- 76dB Typical ripple rejection
- Green product and no Sb/Br
Related products
- Power Management ICs - PMIC
Analog Devices / Linear Technology LTC4151IMS#PBF
The LTC®4151 is a high side power monitor that operates over a wide voltage range of 7V to 80V. In default operation mode, the onboard 12-bit ADC continuously measures high side current, input voltage and an external voltage. Data is reported through the I2C interface when polled by a host. The LTC4151 can also perform on-demand measurement in a snapshot mode.
The LTC4151 features a dedicated shutdown pin to reduce power consumption. The LTC4151-1/LTC4151-2 feature split I2C data pins to drive opto-isolators. The data out on the LTC4151-1 is inverted while that on the LTC4151-2 is not.
SKU: W017433 - Power Management ICs - PMIC
Texas Instruments LM317AEMP
The LM317AEMP/NOPB is an adjustable 3-terminal positive Voltage Regulator is capable of supplying in excess of 1.5A over a 1.2 to 37V output range. It is exceptionally easy to use and require only two external resistors to set the output voltage. Further, both line and load regulations are better than standard fixed regulators. In addition to higher performance than fixed regulators, the LM317AEMP/NOPB series offers full overload protection available only in IC’s. Included on the chip are current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional even if the adjustment terminal is disconnected.
- Specified 1% Output Voltage Tolerance
- Specified Maximum 0.01%/V Line Regulation
- Specified 1.5A Output Current
- Adjustable Output Down to 1.2V
- Current Limit Constant with Temperature
- P+ Product Enhancement Tested
- 80dB Ripple Rejection
- Output is Short-circuit Protected
- Green Product, No Sb/Br
SKU: W001862 - Power Management ICs - PMIC
Texas Instruments TPS2551QDBVRQ1
The TPS2551QDBVRQ1 is a Power Distribution Switch intended for applications in which heavy capacitive loads and short circuits are likely to be encountered. The current-limit threshold is user adjustable between 100mA and 1.1A via an external resistor. The power-switch rise and fall times are controlled to minimize current surges during switching. The device limits the output current to a desired level by switching into a constant-current mode when the output load exceeds the current-limit threshold or a short is present. An internal reverse-voltage detection comparator disables the power-switch in the event that the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT logic output asserts low during both overcurrent and reverse-voltage conditions.
- 2µS Typical fast overcurrent response
- Reverse input-output voltage protection
- Deglitched fault report
- 1µA Maximum standby supply current
SKU: W000342 - Power Management ICs - PMIC
Texas Instruments LP38855S-1.2
The LP38855S-1.2 is a 1.8V fixed output fast-response high-accuracy low-dropout (LDO) Linear Regulator with Enable. The device can maintain output voltage regulation with an extremely low input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages, VBIAS provides power for the internal bias and control circuits, as well as drive for the gate of the N-MOS power transistor, while VIN supplies power to the load. The use of an external bias rail allows the part to operate from ultra-low VIN voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability. The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages and switch mode power supply post regulators.
- Stable with 10µF ceramic capacitors
- ±1.0% Precision output voltage across all line and load conditions (TJ = 25°C)
- Overtemperature and overcurrent protection
SKU: W002951 - Power Management ICs - PMIC
Texas Instruments LM338T/NOPB
The LM338T/NOPB is an adjustable 3-terminal positive Voltage Regulator, capable of supplying in excess of 5A over a 1.2 to 32V output range. They are exceptionally easy to use and require only 2 resistors to set the output voltage. Careful circuit design has resulted in outstanding load and line regulation-comparable to many commercial power supplies. A unique feature of the LM338T/NOPB family is time-dependent current limiting. The current limit circuitry allows peak currents of up to 12A to be drawn from the regulator for short periods of time. This allows the LM338T/NOPB to be used with heavy transient loads and speeds start-up under full-load conditions. Under sustained loading conditions, the current limit decreases to a safe value protecting the regulator.
- Specified Thermal Regulation
- Current Limit Constant with Temperature
- P+ Product Enhancement Tested
- Output is Short-circuit Protected
- Green Product, No Sb/Br
SKU: W000346
