|Manufacturer Part Number||VI-J43-CX|
|Description||DC DC CONVERTER 72V/24V-75W-25|
A range of board-mount AC front-end modules is available for the design of a full AC-DC power system. Global, autoranging input ranges are available from 85 to 264 Vac at 47 to 63 Hz.
The isolated, power factor corrected devices integrate EMI/RFI filtering, transient protection, short circuit protection and inrush limiting to simplify design. These building block components enable high-density power solutions (from 330 W to 1500 W), meeting necessary worldwide standards, including compliance to EMC standards for harmonic currents, line disturbance and transient conducted emissions.
Vicor VI-JT3-EX0 out of 5(0)
The VI-J00 MiniMod family established a new standard in component-level DC-DC converters. This “junior” size complement to the higher power VI-200 family offers up to 100W of isolated and regulated power in a board mounted package. With thousands of input/output/power combinations, and with a maximum operating temperature rating of 100°C, the MiniMod provides nearly unlimited flexibiliy for power system designers to meet demanding time to market requirements.
Utilizing Vicor’s “zero-current-switching” forward converter technology, proven by an installed base of over 8 million units, the MiniMod family combines state of the art power density with theSKU: W005262
XP Power DNR18US050 out of 5(0)
- Rugged Design for Industrial Applications
- DC OK 24 V Models
- Up to 92% Efficiency
- Wide Input Range
- Wide Adjustment Range
- International Safety Approvals
- Full Power to +60°C
- Overvoltage and Overload Protection
Murata Power Solutions MTU1S0505MC0 out of 5(0)
The MTU1S0505MC is a 1-output board-mount isolated SM DC to DC Converter with a footprint reduction of over 50% from the previous generation of 1W SMD DC/DC converter. The MTU1 series is more efficient and offers improved regulation performance for applications where a wide output voltage variation cannot be tolerated. The device is suitable for all applications where high volume production is envisaged.
- Patent protected
- Footprint over pins 0.69cm²
- 1kVDC Isolation ‘Hipot Test’
- Efficiency up to 88% typical
- 1.7W/cm³ Power density
- Toroidal magnetics
- Multi-layer ceramic capacitors
- -40 to +85°C Wide operating temperature range
Murata Power Solutions OKL-T/6-W12N-C0 out of 5(0)
The OKL-T/6-W12 series are miniature non-isolated PoL SMT DC/DC Power Converters for embedded applications. Featuring inspectable Land Grid Array ( iLGA) format, the OKL-T/6-W12N-C measures only 12.2 x 12.2 x 7.2mm maximum. Based on fixed-frequency synchronous buck converter switching topology, the high power conversion efficient point-of-load (PoL) module features programmable output voltage and on/off control. This converter also include under-voltage lock out (UVLO), output short-circuit protection and over-current protections. An optional sequence/tracking feature on OKL-T/6-W12N-C allows power sequencing of PoLs.
- iLGA inspectable Land Grid Array
- Programmable output voltage from 0.591 to 5.5VDC
- Drives up to 300μF ceramic capacitive loads
- High power conversion efficiency at 93%
- Outstanding thermal derating performance
- Short-circuit and over-current protection
- On/off control and power good signal