|Manufacturer Part Number||VI-JT3-EX|
|Description||Converter Mod Dc/Dc 24v 75w|
The VI-J00 MiniMod family established a new standard in component-level DC-DC converters. This “junior” size complement to the higher power VI-200 family offers up to 100W of isolated and regulated power in a board mounted package. With thousands of input/output/power combinations, and with a maximum operating temperature rating of 100°C, the MiniMod provides nearly unlimited flexibiliy for power system designers to meet demanding time to market requirements.
Utilizing Vicor’s “zero-current-switching” forward converter technology, proven by an installed base of over 8 million units, the MiniMod family combines state of the art power density with the
XP Power ITX2403SA0 out of 5(0)
The ITX series is a isolated 6W DC-DC Converter with fully regulated single and dual outputs.
- 2:1 Input range
- 1500VDC Isolation
- SIP8 Plastic Case
- Operating Temperature -40°C to 90°C
- Single and Dual Outputs
TDK-Lambda SWS600-240 out of 5(0)
The SWS600-24 is a 24V/600W 1-output general purpose enclosed Power Supply with active power factor correction and internal fan cooling. Greater than 105%, constant current style over-current protection. SWS300-series supports global use, greater reliability and assists system compliance. This power supply output is fixed and can be adjustable.
- Universal input
- Level-B EMI
- 150mV Ripple and noise
- 81/84% Efficiency
- -10 to 65°C Operating temperature range
Analog Devices / Linear Technology LTM8064EY#PBF0 out of 5(0)
The LTM®8064 is a 58VIN, 6A, constant-voltage, constantcurrent (CVCC), step-down µModule® (power module) regulator. Included in the package are the switching controller, power switches, inductor andsupport components. Operating over an input voltage range of 6V to 58V, the LTM8064 supports an output voltage range of 1.2V to 36V. CVCC operation allows the LTM8064 to accurately regulate its output current up to 7A when sourcing and 9.1A when sinking over the entire output range. The output current can be set by a control voltage, a single resistor or a thermistor. To set the switching frequency, simply place a resistor from the RT pin to ground. A resistor from FB to ground will set the output voltage. Only the bulk input and output filter capacitors are needed to finish the design.
Non-Isolated PoL Module DC DC Converter 1 Output 1.2 ~ 36V 6A 6V – 58V InputSKU: W023610