Manufacturer | Zeta |
---|---|
Manufacturer Part Number | FX-79 |
Description | Buffalo FPV Flying Wing EPO 2000mm Wingspan RC Airplane Kit |
Stock Code | W018806 |
The FX-79 Buffalo is the newest addition to our range of First Person View (FPV) models. It is a great flyer with very predictable handling qualities, excellent stability and lots of wing area to cope with additional loads for FPV use. It is the bigger brother to the massively popular FX-61 Phantom.
The Buffalo features tough EPO construction with moulded in camera bays – one forward looking just under the nose and another mount in the top of the canopy. This larger version features premium 3K wrapped carbon tube spars, and breaks down into three pieces for easy transport.
Assembly of the airframe is quite simple, just a few parts to glue, install your radio equipment and fly. The FX-79 features optional inboard flaps with molded pockets ready to accept your servos. FPV pilots will appreciate the space under the canopy – it’s cavernous! There is plenty of space for your choice FPV gear. The central equipment bay dimensions listed in the specs is only part of the actual space. Additional side pockets are molded in allowing you to move your FPV antennas farther away from your main radio control antennas reducing the chance of interference from the different systems.
- Brand Name: ZETA
- Item Name: FX-79 Buffalo
- Wingspan: 2000mm
- Length: 862mm
- Weight: 1200g (W/o battery)
Features
- Plug and fly – just add electronics, battery, and enjoy
- Ultra tough EPO construction
- Ultra stable flight performance
- Excellent FPV platform
- Plug in outer wing panels for easy transport
- Easy to Hand Launch, Easy to Land
- Stable Handling at Low and High Speeds
- 3K wrapped carbon tube spars
- Outer fuselage pockets designed to separate FPV equipment from radio control equipment
Related products
- RC Airplane Parts
Zeta FX-61 FPV
0 out of 5(0)The Phantom is the newest addition to our range of First Person View (FPV) models. It is a great flyer with very predictable handling qualities, excellent stability and lots of wing area to cope with additional loads for FPV use.
The Phantom features tough EPO construction with moulded in camera bays – one forward looking just under the nose and another mount in the top of the canopy with a plywood support pre-installed. This updated version features premium 3K wrapped carbon tube spars, and now breaks down into three pieces for easy transport.
Assembly of the airframe is very simple, literally four glue joints required – foam glue is also included!
This being the kit version you will require your own choice of 9gram servos, motor and speed controller – we suggest a low current power system not exceeding 30 amps, this will provide you with flights in excess of 30 minutes on a 3s 4500mAh lipo. FPV pilots will appreciate the space under the canopy – it’s cavernous! There is plenty of space for your choice FPV gear.
- Brand: Zeta
- Item No.: FX-61
- Item Name: Phantom Flying Wing RC Kit
- Wingspan: 1550mm
- Length: 683mm
- Flying Weight: About 900g
- Kit Version – Assemble and install your choice of electronics
- Ultra though EPO construction
- Ultra stable flight performance
- Excellent FPV platform
- 30 minute plus flight duration on 4500mAh 3s lipo
- Easy to Hand Launch, Easy to Land
- Stable Handling at Low and High Speeds
- Updated with 3K wrapped carbon tube spars
- Updated with removable outer wing panels for easy transport
SKU: W014646 - RC Airplane Parts
EMAX ES08MDII
0 out of 5(0)- Brand Name: Emax
- Item Name: Emax ES08MDII Servo
- Size: 23mmx11.5mmx24mm
- Operating Voltage: 4.8V-6.0V
- Speed: 0.12sec/60° at 4.8V; 0.1sec/60° at 6V
- Torque : 1.6 kgf.cm-4.8V,2.0 kgf.cm-6.0V
- STD Direction: Counter Clockwise / Pulse Traveling 1500 to 1900 usec
- Weight: 12g
SKU: W023531 - RC Airplane Parts
Tamron MP1010M-VC
0 out of 5(0)Tamron’s Ultra-Compact Camera Module assures high-quality image stabilization when images are captured in a vibrating environment. The new camera module eliminates image blurring by means of Tamron’s proprietary optical vibration compensations, according to the company. The module only measures a total of 58.4mm and weighs approximately 77g. The video output is compatible with the industry-standard 1920X1080 Full HD.
- Pipe Inspection
- Unmanned Aerial Vehicles
- Robotics
- Video Conferencing
- Underwater Applications
- Security/Surveillance
SKU: W016896 - RC Airplane Parts
iPower iFlight GBM2804H-100T
0 out of 5(0)The GBM2804H-100T motor by iPower Motors is the ultimate brushless gimbal motor for GoPro Cameras. This motor is designed for small multi-rotor platforms looking to lift GoPro sized gear – 0.5-1KG/cm Torque. The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.
- Model NO.: GBM2804H-100T
- Weight: 57.9g
- Motor Dimensions: Dia 36.8mm x hgt 26.3mm
- Stator Dimensions: Dia 28mm x hgt 4mm
- Copper wire(OD): 0.17mm
- Configuration: 12N14P
- Resistance: 6.5 ohms
- Base center pitch: 19mm 16mm
- Pre-wound: with 100 turns, Hollow shaft
- Hollow Shaft Diameter: 6.5mm
- Camera range (Torque): 200-400 grams
- Voltage: 7.4V
- Current: 0.121A
- Max Current: 5A
- Rotational Speed: 1920 rpm
SKU: W018766