| Operating Temperature | -40.0 °C (min) |
|---|---|
| Gain Bandwidth Product | 2.00 MHz |
| Input Impedance | 10.0 TΩ |
| Lead-Free Status | Contains Lead |
| Input Capacitance | 3.30 pF |
| Case/Package | MSOP |
| Common Mode Rejection Ratio | 80.0 dB |
| Lifecycle Status | Pre-Release |
| Mounting Style | Surface Mount |
| Mil-Spec | No |
| RoHS | Compliant |
| Slew Rate | 800 mV/μs |
| Packaging | Tube, Rail |
| Supply Current | 2.50 mA |
| REACH SVHC Compliance | No SVHC |
| Number of Pins | 10 |
| Bandwidth | 3.60 MHz |
Amplifiers & Comparators
| Manufacturer | Analog Devices |
|---|---|
| Manufacturer Part Number | AD8244BRMZ |
| Description | IC BUFFER QUAD FET-INPUT 10MSOP |
| Stock Code | W004537 |
| Download |  Technical Datasheet |
The AD8244BRMZ is a low power FET input quad Unity-gain Buffer designed to isolate very large source impedances from the rest of the signal chain. The 2pA maximum bias current, near zero current noise and 10 TΩ input impedance introduce almost no error, even with source impedance well into the megaohms. Many traditional operational amplifier pinouts have a supply pin that is next to the non-inverting input. A guard trace must be routed between these pins to avoid leakage currents much larger than the bias current of a FET input op amp. The AD8244 solves this problem with unique pinout that physically separates the high impedance inputs from the low impedance supplies and outputs of the other buffers. The AD8244 design is focused on solving problems specific to buffers. This includes close channel-to-channel matching which allows channels of the AD8244 to be used in differential signal chains with minimal error.
- Extremely high input impedance
- Low noise
- High DC precision – 3μV/°C maximum offset drift (B grade)
- No leakage from inputs to supply pins
- Provides guarding capability
- Rail-to-rail output
- Single-supply operation – Input range extends to ground
- 250μA Maximum supply current per amplifier
- 2pA Maximum input bias current at 25°C
Related products
-
Amplifiers & Comparators
Texas Instruments LM2900N
The LM2900N is a general purpose quadruple Norton Operational Amplifier consist of four independent, high-gain frequency-compensated Norton operational amplifiers that were designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies is also possible. The low supply current drain is essentially independent of the magnitude of the supply voltage. These devices provide wide band-width and large output voltage swing.
- Wide range of supply voltages, single or dual supplies
- Wide bandwidth
- Large output voltage swing
- Output short-circuit protection
- Internal frequency compensation
- Low input bias current
SKU: W002893 -
Amplifiers & Comparators
Analog Devices HMC833LP6GE
The MAX2870ETJ+ is a 23.5MHz to 6000MHz fractional/ integer-N synthesizer/VCO in 32 pin TQFN package. This high performance ultra wideband phase locked loop (PLL) with integrated voltage control oscillator (VCO) is capable of operating in both integer-N and fractional-N modes. The MAX2870 is capable of synthesizing frequencies from 23.5MHz to 6GHz while maintaining superior phase noise and spurious performance when combined with an external reference oscillator and loop filter. The ultra wide frequency range is achieved with help of multiple integrated VCOs covering 3000MHz to 6000MHz and output dividers ranging from 1 to 128. The device also provides dual differential output drivers which can be independently programmable to deliver -4dBm to +5dBm output power. Both outputs can be muted by either software or hardware control. The MAX2870 is used in test and measurement, satellite communications and PMAR/LMAR/public safety radio.
- Supply voltage range is 3V to 3.6V
- Operating temperature range from -40°C to 85°C
- Manual or automatic VCO selection
- Output binary buffers/dividers for extended frequency range
- Wide frequency PLL with integrated VCO simplifies signal chain & improves performance
- 105MHz in integer-N mode and 50MHz in fractional-N mode
- Reference frequency up to 200MHz and VCO phase noise of -149dBc/Hz at 5MHz offset (VCO at 3000MHz)
- Analogue and digital lock detect indicators, hardware and software shutdown control
- Controlled by 3-wire serial interface and compatible with 1.8V control logic
- In-band noise floor of -226.4 dBc/Hz and 1/f noise of -116dBc/Hz
SKU: W006883 -
Amplifiers & Comparators
Texas Instruments INA215AIDCKT
The INA213AIDCKT is a voltage-output, Current Shunt Monitor, can sense drops across shunts at common-mode voltages from -0.3 to 26V, independent of the supply voltage. The low offset of the zero-drift architecture enables current sensing with maximum drops across the shunt as low as 10mV full-scale. This device operates from a single 2.7 to 26V power supply, drawing a maximum of 100µA of supply current.
- Wide common-mode voltage range (-0.3 to 26V)
- ±1% Gain error (max. over temp.), 0.5µV/°C offset drift (max.), 10ppm/°C gain drift (max.) accuracy
- 50V/V Gain
- 100µA (maximum) Quiescent current
- Green product and no Sb/Br
SKU: W005843 -
Amplifiers & Comparators
Texas Instruments LM386N-1/NOPB
The LM386N-1/NOPB is a Wide Vin Class-D low Power Audio Amplifier with internal gain designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value from 20 to 200. The inputs are ground referenced while the output automatically biases to one-half the supply voltage. The quiescent power drain is only 24mW when operating from a 6V supply, making the LM386 ideal for battery operation.
- Battery operation
- Minimum external parts
- Low quiescent current drain
- Ground referenced input
- Self-centering output quiescent voltage
- Green product and no Sb/Br
SKU: W006347
