Manufacturer Analog Devices
Manufacturer Part Number ADT7410TRZ
Description Temp Sensor
Stock Code W008172
Download Technical Datasheet

The ADT7410 is a high accuracy digital temperature sensor in both a narrow SOIC package and a 4 mm × 4 mm LFCSP package. It contains a band gap temperature reference and a 13-bit ADC to monitor and digitize the temperature to a 0.0625°C resolution. The ADC resolution, by default, is set to 13 bits (0.0625°C). This can be changed to 16 bits (0.0078°C) by setting Bit 7 in the configuration register (Register Address 0x03). The ADT7410 is guaranteed to operate over supply voltages from 2.7 V to 5.5 V. Operating at 3.3 V, the average supply current is typically 210 μA.

The ADT7410 has a shutdown mode that powers down the device and offers a shutdown current of typically 2 μA. The ADT7410 is rated for operation over the −55°C to +150°C temperature range. Pin A0 and Pin A1 are available for address selection, giving the ADT7410 four possible I2 C addresses. The CT pin is an opendrain output that becomes active when the temperature exceeds a programmable critical temperature limit. The default critical temperature limit is 147°C. The INT pin is also an open-drain output that becomes active when the temperature exceeds a programmable limit. The INT and CT pins can operate in either comparator or interrupt mode.

  • Medical equipment
  • Environmental control systems
  • Computer thermal monitoring
  • Thermal protection
  • Industrial process control
  • Power system monitors
  • Hand-held applications

Resolution (Bits)


REACH SVHC Compliance




Supply Current

230 µA

Supply Voltage (DC)

5.50 V (max), 2.70 V (min)

Number of Pins




Lead-Free Status

Lead Free



Lifecycle Status


Number of Bits


Operating Temperature

-55.0 °C to 125 °C