Quiescent Current | 2.60 mA |
---|---|
Number of Pins | 6 |
Packaging | Cut Tape (CT) |
REACH SVHC Compliance | No SVHC |
RoHS | Compliant |
Topology | Boost |
Supply Voltage (DC) | 16.0 V (max) |
Output Voltage | 30.0 V (max), 30.0 V |
Output Current | 340 mA |
Lead-Free Status | Contains Lead |
Input Voltage (DC) | 2.70 V to 16.0 V |
Lifecycle Status | Active |
Mounting Style | Surface Mount |
Operating Temperature | -40.0 °C to 85.0 °C |
Number of Outputs | 1 |
Manufacturer | Analog Devices / Linear Technology |
---|---|
Manufacturer Part Number | LT3465AES6#TRMPBF |
Description | LED DRVR 6Segment |
Stock Code | W000352 |
Download | ![]() |
The LT3465AES6#TRMPBF is a step-up DC/DC Converter designed to drive up to six LEDs in series from a Li-ion cell. Series connection of the LEDs provides identical LED currents and eliminates the need for ballast resistors. This device integrates the Schottky diode required externally on competing devices. Additional features include output voltage limiting when LEDs are disconnected, one-pin shutdown and dimming control. The LT3465 switches at 1.2MHz, allowing the use of tiny external components. The faster LT3465A switches at 2.4MHz. Constant frequency switching results in low input noise and a small output capacitor. Just 0.22µF is required for 3, 4 or 5-LED applications.
- Internal soft-start
- Inherently matched LED current
- No external Schottky diode required
- Open LED protection
- Requires only 0.22µF output capacitor
Related products
-
Drivers & Interfaces
Maxim Integrated MAX3160EAP+
0 out of 5(0)The MAX3160EAP+T is a +3V to +5.5V, 1µA, RS232/RS485/422 multiprotocol transceiver in 20 pin SSOP package. It is pin programmable as 2transmitter/2receiver RS232 interface or a single (half/full duplex) RS485/422 transceiver. This device includes low-dropout transmitter output stage and an onboard dual charge pump to allow RS232 and RS485/422 performance from a +3V to +5.5V supply. It also features pin-selectable transmitter slew rates for both RS232 and RS485/422 modes. Slew-rate limiting minimizes EMI and reduces reflections caused by improperly terminated cables allowing error-free data transmission up to 250Kbps. Disabling slew-rate limiting allows device to transmit data rate up to 10Mbps in RS485/RS422 mode and 1Mbps in RS232 mode. This circuit configuration is ideal for the design of RS232 to RS485 converters, multiprotocol buses or any application that requires both RS232 and RS485 transceivers.
- Supply voltage range is 3V to 5.5V
- Operating temperature range from -40°C to 85°C
- Integrated protection increases robustness
- Transmitters and receivers protected against wiring faults
- True fail-safe receiver prevents false transition on receiver input short or open
- Short-circuit protection over the entire common mode voltage range
- Thermal protection from excessive power dissipation
- Integrated charge-pump circuitry saves board space
- Shutdown supply current of 1µA saves power
- Eliminates the need for a bipolar ±12V supply and enables single supply operation
SKU: W002262 -
Drivers & Interfaces
Marvell 88E1121RA0-TFE1C000
0 out of 5(0)The Alaska® Ultra 88E1111 Gigabit Ethernet Transceiver is a physical layer device for Ethernet 1000BASE-T, 100BASE-TX, and 10BASE-T applications. It is manufactured using standard digital CMOS process and contains all the active circuitry required to implement the physical layer functions to transmit and receive data on standard CAT 5 unshielded twisted pair. The 88E1111 device incorporates the Marvell Virtual Cable Tester® (VCT™) feature, which uses Time Domain Reflectometry (TDR) technology for the remote identification of potential cable malfunctions, thus reducing equipment returns and service calls. Using VCT, the Alaska 88E1111 device detects and reports potential cabling issues such as pair swaps, pair polarity and excessive pair skew. The device will also detect cable opens, shorts or any impedance mismatch in the cable and report accurately within one meter the distance to the fault.
The 88E1111 device supports the Gigabit Media Independent Interface (GMII), Reduced GMII (RGMII), Serial Gigabit Media Independent Interface (SGMII), the Ten-Bit Interface (TBI), and Reduced TBI (RTBI) for direct connection to a MAC/Switch port. The 88E1111 device incorporates an optional 1.25 GHz SERDES (Serializer/Deserializer). The serial interface may be connected directly to a fiber-optic transceiver for 1000BASE-T/1000BASE-X media conversion applications. Additionally, the 88E1111 device may be used to implement 1000BASE-T Gigabit Interface Converter (GBIC) or Small Form Factor Pluggable (SFP) modules.
The 88E1111 device uses advanced mixed-signal processing to perform equalization, echo and crosstalk cancellation, data recovery, and error correction at a gigabit per second data rate. The device achieves robust performance in noisy environments with very low power dissipation.The 88E1111 device is offered in three different package options including a 117-Pin TFBGA, a 96-pin BCC featuring a body size of only 9 x 9 mm, and a 128 PQFP package.
SKU: W007840 -
Drivers & Interfaces
AS5048 AS5048L Encoder IC
0 out of 5(0)AS5048 High Resolution Position Sensor Features
- Contactless absolute angle position measurement
- 14-bit resolution (16384 positions/revolution)
- In system programmable zero position via I²C command
- Immune to external magnetic stray fields Benefits
- Highest reliability and durability in harsh environments
- High precision
- Great flexibility during assembly (no external programmer needed)
- Lower material cost (no magnetic shielding needed)
SKU: W022215 -
Drivers & Interfaces
IST8310 Three-axis Magnetometer IC
0 out of 5(0)Three-axis Magnetometer. iSentek’s three-axis magnetometers use anisotropic magneto resistance (AMR)technology. They offer high spatial resolution, high precision and low power consumption performance. The product line provides below features:
- Calibration free after strong magnetic interferece by ultra-low hysteresis magnetic flux bending technology.
- Two-directional magnetic setting enables high accuracy measurement of magnetic vector variation in 3 dimensional pace.
- Support mainstream mobile phone operating systems and provide driver containing tilt, triaxle crosstalk, temperature, and hard/soft iron compensation functions.
- Pin-to-pin compatible with mainstream magnetometers.
SKU: W023181