| Size-Height | 25.9 mm |
|---|---|
| Power Rating | 10.0 W |
| Packaging | Box |
| Size-Length | 51.3 mm |
| Size-Width | 25.9 mm |
| RoHS | Non-Compliant |
| Weight | 28.0 g |
| Output Voltage | 5.00 V |
| Output Power | 10.0 W (max) |
| Lead-Free Status | Contains Lead |
| Frequency | 220 kHz |
| Number of Outputs | 1 |
| Output Current | 2.00 A |
| Operating Temperature | 90.0 °C (max) |
| Mounting Style | Through Hole |
| brands |
Power Suppy & Line Protection
| Manufacturer | Bel Fuse |
|---|---|
| Manufacturer Part Number | DFC10E24S5 |
| Description | DC DC Converter 18V-36V Input 5V 2A Output |
| Stock Code | W000005 |
| Download |  Technical Datasheet |
Module DC-DC 24VIN 1-OUT 5V 2A 10W 4-Pin
Powerone / Bel Fuse
Related products
-
Power Suppy & Line Protection
Murata Power Solutions NME0505SC
The NME0505SC from Murata is an isolated, 1W, single output DC to DC converter in SIP package. It is particularly suited to isolate or converting DC power rails. The galvanic isolation allows the device to configure an isolated negative rail in systems where only positive rails exist.
The NME series of DC-DC Converters is particularly suited to isolating and/or converting DC power rails. The galvanic isolation allows the device to be configured to provide an isolated negative rail in systems where only positive rails exist. The wide temperature range guarantees startup from –40°C and full 1 watt output at 85°C2 . For lower ripple, refer to output ripple reduction section.
The NME series offers short circuit protection options (PC) across the operating temperature range. Short circuits of less than 1Ω cause the converter to enter a ‘foldback’ limiting mode such that the input current is approximately 95mA for 0505 variant. Protection is continuous and auto-resetting on removal of the short circuit
SKU: W000006 -
Power Suppy & Line Protection
Bel Fuse 40IMX4-1212-8
The IMX4 Series of board-mountable 4-watt DC-DC converters has been designed according to the latest industry requirements and standards. The converters are particularly suitable for use in mobile or stationary applications in transport, industry, or telecom, where variable input voltages or high transient voltages are prevalent. Covering a total input voltage range from 8.4 VDC up to 121 VDC with three different models, the converters are available with single or dual output from 3.3 up to _ VDC with flexible load distribution.
SKU: W000007 -
Power Suppy & Line Protection
Tracopower TEN 30-2411WI
The TEN 30-2411WI is a high performance 30W DC-DC Converter featuring ultra wide 4:1 input voltage range of 10 to 40VDC and 5VDC output with industry-standard footprint. A very high efficiency allows operating temperatures up to 85°C. A built-in filter for both input and output minimizes the need for external filtering. Further standard features include 5VDC output voltage, remote ON/OFF, output voltage trimming, overvoltage protection and under-voltage lockout and short-circuit protection. This device is suitable for use in battery operated equipment and many applications where isolated, tightly regulated voltages are required and space is limited on the PCB.
- Under voltage lockout
- Shielded metal case with insulated base plate
- 87% Typical efficiency
- 24VDC Nominal input voltage
SKU: W004205
