| Output Voltage | 6.00 V, 3.80 V |
|---|---|
| Input Voltage (DC) | 5.50 V (max) |
| Lead-Free Status | Lead Free |
| Mounting Style | Through Hole |
| Isolation Voltage | 3.75 kV |
| Case/Package | DIP |
| Input Current | 10.9 mA |
| Number of Channels | 1 |
| Operating Temperature | -40.0 °C (min) |
| Number of Circuits | 1 |
| Rise Time | 2.96 µs |
| RoHS | Compliant |
| Packaging | Tube |
| Supply Voltage (DC) | 4.50 V |
| REACH SVHC Compliance | No SVHC |
| Number of Pins | 8 |
| Bandwidth | 100 kHz |
Amplifiers & Comparators
| Manufacturer | Broadcom |
|---|---|
| Manufacturer Part Number | HCPL-7800-000E |
| Description | ISOLATION AMP, 100KHZ, DIP-8 |
| Stock Code | W003181 |
| Download |  Technical Datasheet |
The HCPL-7800-000E is an Isolation Amplifier for current sensing in electronic motor drives. The high CMR capability of isolation amplifier provides the precision and stability needed to accurately monitor motor current in high noise motor control environments, providing for smoother control in various types of motor control applications. In a typical implementation the motor current flows through an external resistor and the resulting analogue voltage drop is sensed by the amplifier. A differential output voltage is created on the other side of the amplifier optical isolation barrier. It is designed to ignore very high common-mode transient slew rates.
- 15kV/µs Common-mode rejection at VCM = 1000V
- Advanced sigma-delta A/D converter technology
- Compact and auto-insertable
- Fully differential circuit topology
Related products
-
Amplifiers & Comparators
Texas Instruments LM386N-1/NOPB
The LM386N-1/NOPB is a Wide Vin Class-D low Power Audio Amplifier with internal gain designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value from 20 to 200. The inputs are ground referenced while the output automatically biases to one-half the supply voltage. The quiescent power drain is only 24mW when operating from a 6V supply, making the LM386 ideal for battery operation.
- Battery operation
- Minimum external parts
- Low quiescent current drain
- Ground referenced input
- Self-centering output quiescent voltage
- Green product and no Sb/Br
SKU: W006347 -
Amplifiers & Comparators
Texas Instruments OPA340NA/3K
The OPA340NA/3K is a single-supply Operational Amplifier optimized for low-voltage. High-speed operation make them ideal for driving sampling analogue-to-digital (A/D) converters. They are also well-suited for general purpose and audio applications as well as providing I/V conversion at the output of digital-to-analogue (D/A) converters. Single version have identical specifications for design flexibility. The OPA340 series operate on a single supply as low as 2.5V with an input common-mode voltage range that extends 500mV below ground and 500mV above the positive supply. Output voltage swing is to within 1mV of the supply rails with a 100k load.
- Rail-to-rail input/output
- 750µA/channel Low quiescent current
- Green product and no Sb/Br
SKU: W020494 -
Amplifiers & Comparators
Texas Instruments LM7321MF/NOPB
The LM7321MF/NOPB is a single high output current Operational Amplifier with rail-to-rail input and output. The LM732xx family is efficient, achieving 18V/µs slew rate and 20MHz unity gain bandwidth while requiring only 1mA of supply current per op amp. The LM732xx device performance is fully specified for operation at 2.7V, ±5 and ±15V. The LM732xx device is designed to drive unlimited capacitive loads without oscillations. Greater than rail-to-rail input common-mode voltage range with 50dB of common-mode rejection across this wide voltage range, allows both high-side and low-side sensing. Most device parameters are insensitive to power supply voltage and this makes the parts easier to use where supply voltage may vary, such as automotive electrical systems and battery powered equipment. This amplifier has true rail-to-rail output and can supply a respectable amount of current (15mA) with minimal head-room from either rail (300mV) at low distortion (0.05% THD+noise).
- Capacitive load tolerance unlimited
- Input common-mode voltage of 0.3V beyond rails
- +65/-100mA Output current
- 15nV/√Hz Input voltage noise
- 1.3pA/√Hz Input current noise
- 1.1mA/channel Supply current
- -86dB Distortion THD+noise
- Green product and no Sb/Br
SKU: W000564 -
Amplifiers & Comparators
Analog Devices AD8278ARZ
The AD8278 and AD8279 are general-purpose difference amplifiers intended for precision signal conditioning in power critical applications that require both high performance and low power. The AD8278 and AD8279 provide exceptional commonmode rejection ratio (80 dB) and high bandwidth while amplifying input signals that are well beyond the supply rails. The on-chip resistors are laser trimmed for excellent gain accuracy and high CMRR. They also have extremely low gain drift vs. temperature.
The common-mode range of the amplifier extends to almost triple the supply voltage (for G = ½), making the amplifer ideal for single-supply applications that require a high commonmode voltage range. The internal resistors and ESD circuitry at the inputs also provide overvoltage protection to the op amp. The AD8278 and AD8279 can be used as difference amplifiers with G = ½ or G = 2. They can also be connected in a high precision, single-ended configuration for non inverting and inverting gains of −½, −2, +3, +2, +1½, +1, or +½.
The AD8278 and AD8279 provide an integrated precision solution that has a smaller size, lower cost, and better performance than a discrete alternative.
SKU: W003477
