|REACH SVHC Compliance|
|Number of Pins|
Cut Tape (CT)
-55.0 °C (min)
|Manufacturer Part Number||MLB-160-808-0120PP|
|Description||Ferrite SMD 2.5 A 0.07 Ω 0603|
FERRITE BEAD, 0603 CASE, 120OHM, 2.5A; Impedance: 120ohm; DC Resistance Max: 0.07ohm; DC Current Rating: 2.5A
Vishay IHLP4040DZER101M110 out of 5(0)
The IHLP4040DZER101M11 is a surface mount IHLP® shielded High-current Inductor handles high transient current spikes without saturation. This low profile inductor features frequency of up to 1MHz and an ultra-low buzz noise, due to its composite construction.
- Shielded construction
- Lowest DCR/μH
Bourns SRP1038A-330M0 out of 5(0)
The SRP1038A series shielded Power Inductor with carbonyl powder core and tin termination. It has enamelled copper wire winding and suitable for DC/DC converters.
- High saturation current
- AEC-Q200 qualified
- -40 to 150°C Operating temperature range
- 1V Test voltage
- 100kHz Test frequency
Taiyo Yuden BK2125HS121-T0 out of 5(0)
Internal silver printed layer creates a closed circuit which acts as a magnetic shield minimizing heat generation and crosstalk.
No need for grounding provides greater circuit design flexibility.
Several material types and a broad range of impedance values provide noise countermeasures for various applications.
High frequency noise countermeasure in personal computers, digital cameras and other
information system products. For use on digital product clock lines and general signal lines.
Radiated noise suppression in computer or printer interfaces and harness connectors.
Noise suppression in video and other AV products.
Prevents interference between circuits in cellular phones (PHS, PDC, etc.)
Due to the closed internal circuit which acts as a magnetic shield, the TS material is extremely effective as a noise filter on LSI power supply lines where downsizing of components is needed.SKU: W004324
Murata BLM18PG330SN1D0 out of 5(0)
The Murata BLM18PG series are EMIFIL chip ferrite beads for suppressing high frequency noise in power line application. These chip ferrite beads are designed for reducing the possibility of resonance to provide undistorted signal waveform. EMIFIL chip ferrite beads do not require connection to ground so they are effectively used in circuits without stable ground lines. The nickel barrier structure of the external electrodes provides excellent solder heat resistance. BLM18PG series can be used in high current circuits due to its low DC resistance and can match power lines to a maximum of 6A DC.
- EIA 0603 standard chip size
- Miniaturized ferrite beads
- Effective at low impedance line
- Available in selective impedance range values at 100MHz
- Operating temperature range -55°C to 125°C