| Power Supply Rejection Ratio | 70.0 dB (min) |
|---|---|
| Gain Bandwidth Product | 10.0 MHz |
| Lead-Free Status | Lead Free |
| Lifecycle Status | Active |
| Mounting Style | Surface Mount |
| Input Offset Voltage | 3.00 mV (max) |
| Input Offset Drift | 1.70 µV/K |
| Bandwidth | 10.0 MHz |
| Case/Package | MSOP |
| Common Mode Rejection Ratio | 65.0 dB (min) |
| Number of Channels | 2 |
| Number of Pins | 8 |
| Number of Circuits | 2 |
| Slew Rate | 7.00 V/μs |
| Supply Current | 1.30 mA (max) |
| Supply Voltage (DC) | 5.50 V (max), 2.40 V (min) |
| RoHS | Compliant |
| REACH SVHC Compliance | No SVHC |
| Operating Temperature | -40.0 °C to 125 °C |
| Packaging | Tube, Rail |
Amplifiers & Comparators
| Manufacturer | Microchip |
|---|---|
| Manufacturer Part Number | MCP6292-E/MS |
| Description | IC OPAMP GP 10MHZ RRO 8MSOP |
| Stock Code | W022806 |
| Download |  Technical Datasheet |
The MCP6292-E/MS is a 10MHz rail-to-rail Operational Amplifier provides wide bandwidth for the current. It features a gain bandwidth product (GBWP) and a 65° phase margin. This family also operates from a single supply voltage as low as 2.4V, while drawing 1mA (typical) quiescent current. Additionally, the MCP6291 supports rail-to-rail input and output swing, with a common mode input voltage range of +300mV VDD to -300mV VSS. This family of operational amplifiers is designed with an advanced CMOS process.
- ±3mV Maximum input offset voltage
- 65dB (typical) Common mode rejection ratio
- 70dB Typical power supply rejection ratio
Related products
- Amplifiers & Comparators
Texas Instruments LM7321MF/NOPB
The LM7321MF/NOPB is a single high output current Operational Amplifier with rail-to-rail input and output. The LM732xx family is efficient, achieving 18V/µs slew rate and 20MHz unity gain bandwidth while requiring only 1mA of supply current per op amp. The LM732xx device performance is fully specified for operation at 2.7V, ±5 and ±15V. The LM732xx device is designed to drive unlimited capacitive loads without oscillations. Greater than rail-to-rail input common-mode voltage range with 50dB of common-mode rejection across this wide voltage range, allows both high-side and low-side sensing. Most device parameters are insensitive to power supply voltage and this makes the parts easier to use where supply voltage may vary, such as automotive electrical systems and battery powered equipment. This amplifier has true rail-to-rail output and can supply a respectable amount of current (15mA) with minimal head-room from either rail (300mV) at low distortion (0.05% THD+noise).
- Capacitive load tolerance unlimited
- Input common-mode voltage of 0.3V beyond rails
- +65/-100mA Output current
- 15nV/√Hz Input voltage noise
- 1.3pA/√Hz Input current noise
- 1.1mA/channel Supply current
- -86dB Distortion THD+noise
- Green product and no Sb/Br
SKU: W000564 - Amplifiers & Comparators
Texas Instruments LM124J
The LM124J is a low power quad Operational Amplifier designed to operate from a single power supply over a wide range of voltages. Operation from split-power supplies is also possible and the low-power supply current drain is independent of the magnitude of the power supply voltage. Application areas include transducer amplifiers, DC gain blocks and all the conventional op-amp circuits which now can be more easily implemented in single power supply systems. For example, the LM124 series can directly operate off of the standard 5V power supply voltage which is used in digital systems and easily provides the required interface electronics without requiring the additional ±15V power supplies.
- Internally frequency compensated for unity gain
- 45nA Low input biasing current
- 2mV Low input offset voltage
- 5nA Offsets current
- Input common-mode voltage range includes ground
- Differential input voltage range equal to the power supply voltage
- Military rated
SKU: W000094 - Amplifiers & Comparators
Analog Devices AD8418WBRMZ
The AD8418 is a high voltage, high resolution current shunt amplifier. It features an initial gain of 20 V/V, with a maximum ±0.15% gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. The AD8418 offers excellent input common-mode rejection from −2 V to +70 V. The AD8418 performs bidirectional current measurements across a shunt resistor in a variety of automotive and industrial applications, including motor control, battery management, and solenoid control.
he AD8418 offers breakthrough performance throughout the −40°C to +125°C temperature range. It features a zero drift core, which leads to a typical offset drift of 0.1 µV/°C throughout the operating temperature range and the common-mode voltage range. The AD8418 is fully qualified for automotive applications and includes EMI filters and patented circuitry to enable output accuracy with pulse-width modulation (PWM) type input common-mode voltages. The typical input offset voltage is ±200 µV. The AD8418 is offered in 8-lead MSOP and SOIC packages.
- Typical 0.1 µV/°C offset drift
- Maximum ±400 µV voltage offset over full temperature range
- 2.7 V to 5.5 V power supply operating range
- Electromagnetic interference (EMI) filters Included
- High common-mode input voltage range
- −2 V to +70 V operating
- −4 V to +85 V survival
- Initial gain = 20 V/V
- Wide operating temperature range: −40°C to +125°C
- Bidirectional operation
- Available in 8-lead SOIC and 8-lead MSOP
- Common-mode rejection ratio (CMRR): 86 dB, dc to 10 kHz
- Qualified for automotive applications
SKU: W002729 - Amplifiers & Comparators
Texas Instruments LM2900N
The LM2900N is a general purpose quadruple Norton Operational Amplifier consist of four independent, high-gain frequency-compensated Norton operational amplifiers that were designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies is also possible. The low supply current drain is essentially independent of the magnitude of the supply voltage. These devices provide wide band-width and large output voltage swing.
- Wide range of supply voltages, single or dual supplies
- Wide bandwidth
- Large output voltage swing
- Output short-circuit protection
- Internal frequency compensation
- Low input bias current
SKU: W002893 - Amplifiers & Comparators
Texas Instruments INA215AIDCKT
The INA213AIDCKT is a voltage-output, Current Shunt Monitor, can sense drops across shunts at common-mode voltages from -0.3 to 26V, independent of the supply voltage. The low offset of the zero-drift architecture enables current sensing with maximum drops across the shunt as low as 10mV full-scale. This device operates from a single 2.7 to 26V power supply, drawing a maximum of 100µA of supply current.
- Wide common-mode voltage range (-0.3 to 26V)
- ±1% Gain error (max. over temp.), 0.5µV/°C offset drift (max.), 10ppm/°C gain drift (max.) accuracy
- 50V/V Gain
- 100µA (maximum) Quiescent current
- Green product and no Sb/Br
SKU: W005843
