| Supply Voltage (DC) | 1.50 V (min), 6.00 V (max) |
|---|---|
| Output Current | 260 µA, 260 A |
| Packaging | Bulk |
| RoHS | Compliant |
| Operating Temperature | -30.0 °C (min) |
| Mounting Style | Through Hole |
| Lead-Free Status | Lead Free |
| Lifecycle Status | Active |
IC Sensors
| Manufacturer | Panasonic |
|---|---|
| Manufacturer Part Number | Panasonic AMS302 |
| Description | SENSOR LIGHT NAPICA 6V 5MM RND |
| Stock Code | W001242 |
| Download |  Technical Datasheet |
The AMS302 is a photo IC type high sensitive Light Sensor features built-in optical filter for spectral response similar to that of the human eye, photocurrent is proportional to illumination (linear output) and uses environmentally friendly silicon chips. Suitable for use with brightness detection for LCD backlight control for LCD devices (LCD TVs, car navigation systems and mobile PCs).
- -30 to 85°C Operating temperature range
Related products
-
IC Sensors
Analog Devices TMP36FS
The TMP36FSZ is a Low Voltage Temperature Sensor that provides a voltage output that is linearly proportional to the Celsius (centigrade) temperature. It do not require any external calibration to provide typical accuracies of ±1°C at +25°C and ±2°C over the -40 to +125°C temperature range. The low output impedance of the TMP36 and its linear output and precise calibration simplify interfacing to temperature control circuitry and ADCs. This sensor is intended for single-supply operation from 2.7 to 5.5V maximum. The supply current runs well below 50µA, providing very low self-heating less than 0.1°C in still air. In addition, a shutdown function is provided to cut the supply current to less than 0.5µA. The TMP36 is specified from -40 to +125°C, provides a 750mV output at 25°C and operates to 125°C from a single 2.7V supply. It has an output scale factor of 10mV/°C and functionally compatible with the LM50.
- Low voltage operation
- Calibrated directly in °C
- 10mV/°C Scale factor
- ±2°C Accuracy over-temperature (typical)
- ±0.5°C Linearity (typical)
- Stable with large capacitive loads
- Less than 50µA quiescent current
- 0.5µA Maximum shutdown current
- Low self-heating
SKU: W002383 -
IC Sensors
Analog Devices TMP36GRTZ-REEL7
The TMP36GRTZ-REEL7 is a Low Voltage Temperature Sensor that provides a voltage output that is linearly proportional to the Celsius (centigrade) temperature. It do not require any external calibration to provide typical accuracies of ±1°C at +25°C and ±2°C over the -40 to +125°C temperature range. The low output impedance of the TMP36 and its linear output and precise calibration simplify interfacing to temperature control circuitry and ADCs. This sensor is intended for single-supply operation from 2.7 to 5.5V maximum. The supply current runs well below 50µA, providing very low self-heating less than 0.1°C in still air. In addition, a shutdown function is provided to cut the supply current to less than 0.5µA. The TMP36 is specified from -40 to +125°C, provides a 750mV output at 25°C and operates to 125°C from a single 2.7V supply. It has an output scale factor of 10mV/°C and functionally compatible with the LM50.
- Low voltage operation
- Calibrated directly in °C
- 10mV/°C Scale factor
- ±2°C Accuracy over-temperature (typical)
- ±0.5°C Linearity (typical)
- Stable with large capacitive loads
- Less than 50µA quiescent current
- 0.5µA Maximum shutdown current
- Low self-heating
SKU: W000248 -
IC Sensors
NXP Semiconductors MPL3115A2
The Xtrinsic MPL3115A2 employs a MEMS pressure sensor with an I2C interface to provide accurate Pressure/Altitude and Temperature data. The sensor outputs are digitized by a high resolution 24-bit ADC. Internal processing removes compensation tasks from the host MCU system. Multiple user-programmable , power saving, interrupt and autonomous data acquisition modes are available, including programmed acquisition cycle timing, and poll-only modes. Typical active supply current is 40 μA per measurement-second for a stable 10 cm output resolution.
- Fully compensated internally
- Programmable events
- Autonomous data acquisition
- Resolution down to 0.1 m
- 32-sample FIFO
- Ability to log data up to 12 days using the FIFO
- 1 second to 9 hour data acquisition rate
- I2C digital output interface
SKU: W002264
