RoHS | Compliant |
---|---|
Packaging | Reel |
Mounting Style | Surface Mount |
Manufacturer | Pulse |
---|---|
Manufacturer Part Number | HX2019NLT |
Description | MODULE MAGNETICS POE SINGLE VOIP |
Stock Code | W004325 |
Download | ![]() |
Audio Transformers / Signal Transformers 100Base-TX SMD PoE 350uH .75Ohms 1-Portf
Related products
-
Power Management ICs - PMIC
Texas Instruments LP38855S-1.2
0 out of 5(0)The LP38855S-1.2 is a 1.8V fixed output fast-response high-accuracy low-dropout (LDO) Linear Regulator with Enable. The device can maintain output voltage regulation with an extremely low input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages, VBIAS provides power for the internal bias and control circuits, as well as drive for the gate of the N-MOS power transistor, while VIN supplies power to the load. The use of an external bias rail allows the part to operate from ultra-low VIN voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability. The fast transient response of this device makes it suitable for use in powering DSP, microcontroller core voltages and switch mode power supply post regulators.
- Stable with 10µF ceramic capacitors
- ±1.0% Precision output voltage across all line and load conditions (TJ = 25°C)
- Overtemperature and overcurrent protection
SKU: W002951 -
Power Management ICs - PMIC
Texas Instruments TPS767D301PWP
0 out of 5(0)The TPS767D301PWP is a Dual-output Low-dropout (LDO) Voltage Regulator that offers fast transient response, low dropout voltages, dual outputs and incorporating stability with 10µF low ESR output capacitors. The TPS767D301 dual voltage regulator is designed primarily for DSP applications. This device can be used in any mixed-output voltage application, with each regulator supporting up to 1A. Dual active-low reset signals allow resetting of core-logic and I/O separately. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85µA over the full range of output current, 0mA to 1A). These two key specifications yield a significant improvement in operating life for battery-powered systems.
- Dual output voltages for split-supply applications
- Output current range of 0mA to 1.0A per regulator
- 3.3/2.5, 3.3/1.8 and 3.3V/Adjustable output
- Fast-transient response
- 2% Tolerance over load and temperature
- 350mV Typical dropout voltage at 1A
- Ultra-low 85µA typical quiescent current
- 1µA Quiescent current during shutdown
- Dual open-drain power-on reset with 200ms delay for each regulator
- Thermal shutdown protection for each regulator
SKU: W007713 -
Power Management ICs - PMIC
Texas Instruments LP3963ES-3.3/NOPB
0 out of 5(0)The LP3963ES-3.3/NOPB is a 3.3V fixed output fast ultra-low-dropout (LDO) Linear Regulator operate from a 2.5 to 7V input supply. This device respond very fast to step changes in load which makes them suitable for low voltage microprocessor applications. The device is developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the device to operate under extremely low-dropout (LDO) conditions. The dropout voltage is typically 80mV at 300mA load current and 800mV at 3A load current.
- Low ground pin current
- 0.06% Load regulation
- 15µA Quiescent current in shutdown mode
- ±1.5% Output voltage accuracy
- ERROR flag indicates output status
- Minimum output capacitor requirements
- Overtemperature and overcurrent protection
SKU: W011855