| Supply Voltage (DC) | 24.0 V |
|---|---|
| RoHS | Compliant |
| Power Rating | 4.32 W |
| Current Rating | 180 mA |
Electrical
| Manufacturer | Sanyo Denki |
|---|---|
| Manufacturer Part Number | 109P0424J3013 |
| Description | FAN AXIAL 24VD |
| Stock Code | W001846 |
| Download |  Technical Datasheet |
DC Fans DC Fan, 40x28mm, 24VDC, Groove for Lead, Tachometer
Related products
-
Electrical
Multicomp MC32688
The MC32688 is a square Fan Filter Assembly made of plastic. Assemblies consist of a finger guard, foam filter and retainer. Guards and retainers are manufactured using high impact plastics. Foam filter is manufactured to meet UL94HF1 smoke generation requirements.
- UL94V-0 Flammability rating
- 45PPI Efficiency
- Multicomp products are rated 4.6 out of 5 stars
- 12 month limited warranty *view Terms & Conditions for details
- 96% of customers would recommend to a friend
SKU: W004015 -
Electrical
Mean Well LRS-200-5
- 1U ultra low profile economical power supply
- AC input: 90~132Vac / 180~264Vac selectable by switch
- Working temperature: -25~+70°C
- UL60950-1 approved
- Withstand 300Vac surge input for 5 seconds
- High efficiency
- No load power consumption: <0.75W
- Cooling: free air convection
- Withstand 5G vibration test
- Operation up to 5,000 meters
- LED indicator for power on
- Protections: short circuit / over load / over voltage / over temperature
SKU: W016856 -
Electrical
EBM-Papst 614NGH
ebm-papst offers a wide range of DC axial fans from 25 mm to 280 mm in size. Many DC fans can be operated on voltages that are up to 50% lower and 25% higher than their nominal voltage (see voltage range in the data sheet). This allows the air performance to be adapted to the cooling requirements and the noise to be reduced, even if the fan does not have a control input.
- High product quality
- Long service life
- Robust mechanical design
- Acoustically optimised
- IP20 protection rating
SKU: W004639 -
Electrical
Schneider Electric LC1D80M7
The LC1D80M7 is a 3-pole TeSys D Contactor with 3PST-NO contact, screw clamp terminals and safety cover. The TeSys D contactor offers quick simple setup, while maintaining a compact size of 45 and 55mm (40 to 65A) as well as compliance with international standards. From 40 to 65A versions are equipped with EverLink, this new patented terminal technology, assures a permanent tightening quality even in the event of conductor creep. The TeSys D contactor has been designed for perfect integration in control systems.
- AC 50/60Hz control circuit type
- 8kV Rated impulse withstand voltage
- 0.80mΩ at 50Hz Average impedance
- 5mA for signaling circuit Minimum switching current
- 17V for signaling circuit Minimum switching voltage
- >10MΩ for signaling circuit Insulation resistance
- IP2x Protection rating
SKU: W007155
