The RPA30-2405SAW/P from Recom Power is a RPA30-AW series 30W single output DC to DC converter with positive control function. This high power density converter has 4:1 wide input voltage range and industry standard 1"x1" case size. Despite its small size, the RPA30-AW converter is fully specified device with high efficiency, no minimum load, 1600VDC isolation, tight regulation and low ripple/noise figures. This single output DC to DC converter offers a ±10% trim range. The outputs are also fully protected against overtemperature, short circuits, overcurrent and overvoltage. The converter finds many uses in railway applications where board space is at a premium. It has Pi-Type internal input filter.

• Input voltage range from 9VDC to 36VDC (24VDC nominal input voltage)
• Output voltage of 5VDC and output current of 6000mA
• Input current of 1450mA
• Efficiency of 89% and maximum capacitive load of 10000µF
• Maximum line regulation of ±0.2%
• Load regulation of ±0.2%
• Start-up time of 8ms (power-up, CTRL ON/OFF) and internal operating frequency of 550KHz
• Ripple and noise of 50mVp-p and maximum output accuracy of ±2.0%
• Minimum isolation resistance of 10Mohm and typical isolation capacitance of 1100pF
• Maximum case temperature of 105°C

The SWS600-24 is a 24V/600W 1-output general purpose enclosed Power Supply with active power factor correction and internal fan cooling. Greater than 105%, constant current style over-current protection. SWS300-series supports global use, greater reliability and assists system compliance. This power supply output is fixed and can be adjustable.

• Universal input
• Level-B EMI
• 150mV Ripple and noise
• 81/84% Efficiency
• -10 to 65°C Operating temperature range

The IMX4 Series of board-mountable 4-watt DC-DC converters has been designed according to the latest industry requirements and standards. The converters are particularly suitable for use in mobile or stationary applications in transport, industry, or telecom, where variable input voltages or high transient voltages are prevalent. Covering a total input voltage range from 8.4 VDC up to 121 VDC with three different models, the converters are available with single or dual output from 3.3 up to _ VDC with flexible load distribution.