| Size-Width | 91.9 mm |
|---|---|
| RoHS | Compliant |
| Weight | 2.00 kg |
| REACH SVHC Compliance | No SVHC |
| Size-Height | 92.0 mm |
| Supply Voltage (DC) | 265 V |
| Size-Length | 190 mm |
| Power Rating | 600 W |
| Output Current | 25.0 A |
| Frequency | 60.0 Hz |
| Output Voltage | 24.0 V |
| Mounting Style | Chassis |
| Output Power | 600 W (max) |
| Number of Outputs | 1 |
Power Supplies
| Manufacturer | TDK-Lambda |
|---|---|
| Manufacturer Part Number | SWS600-24 |
| Description | ENCLOSED, 1 O/P, 600W, 25A, 24V |
| Stock Code | W005317 |
| Download |  Technical Datasheet |
The SWS600-24 is a 24V/600W 1-output general purpose enclosed Power Supply with active power factor correction and internal fan cooling. Greater than 105%, constant current style over-current protection. SWS300-series supports global use, greater reliability and assists system compliance. This power supply output is fixed and can be adjustable.
- Universal input
- Level-B EMI
- 150mV Ripple and noise
- 81/84% Efficiency
- -10 to 65°C Operating temperature range
Related products
- Power Supplies
Murata Power Solutions NME0505SC
The NME0505SC from Murata is an isolated, 1W, single output DC to DC converter in SIP package. It is particularly suited to isolate or converting DC power rails. The galvanic isolation allows the device to configure an isolated negative rail in systems where only positive rails exist.
The NME series of DC-DC Converters is particularly suited to isolating and/or converting DC power rails. The galvanic isolation allows the device to be configured to provide an isolated negative rail in systems where only positive rails exist. The wide temperature range guarantees startup from –40°C and full 1 watt output at 85°C2 . For lower ripple, refer to output ripple reduction section.
The NME series offers short circuit protection options (PC) across the operating temperature range. Short circuits of less than 1Ω cause the converter to enter a ‘foldback’ limiting mode such that the input current is approximately 95mA for 0505 variant. Protection is continuous and auto-resetting on removal of the short circuit
SKU: W000006 - Power Supplies
Analog Devices / Linear Technology LTM8064EY#PBF
The LTM®8064 is a 58VIN, 6A, constant-voltage, constantcurrent (CVCC), step-down µModule® (power module) regulator. Included in the package are the switching controller, power switches, inductor andsupport components. Operating over an input voltage range of 6V to 58V, the LTM8064 supports an output voltage range of 1.2V to 36V. CVCC operation allows the LTM8064 to accurately regulate its output current up to 7A when sourcing and 9.1A when sinking over the entire output range. The output current can be set by a control voltage, a single resistor or a thermistor. To set the switching frequency, simply place a resistor from the RT pin to ground. A resistor from FB to ground will set the output voltage. Only the bulk input and output filter capacitors are needed to finish the design.
Non-Isolated PoL Module DC DC Converter 1 Output 1.2 ~ 36V 6A 6V – 58V Input
SKU: W023610 - Power Supplies
Vicor VI-J43-CX
A range of board-mount AC front-end modules is available for the design of a full AC-DC power system. Global, autoranging input ranges are available from 85 to 264 Vac at 47 to 63 Hz.
The isolated, power factor corrected devices integrate EMI/RFI filtering, transient protection, short circuit protection and inrush limiting to simplify design. These building block components enable high-density power solutions (from 330 W to 1500 W), meeting necessary worldwide standards, including compliance to EMC standards for harmonic currents, line disturbance and transient conducted emissions.
SKU: W003133
