| Output Voltage | -37.0 V (min), -37.0 V (max), -1.20 V (max), -1.20 V (min) |
|---|---|
| Dropout Voltage | 1.90 V |
| Mounting Style | Surface Mount |
| Number of Outputs | 1 |
| Lifecycle Status | Active |
| Lead-Free Status | Contains Lead |
| Case/Package | SOT-223 |
| Current Rating | 1.00 A |
| Number of Regulated Outputs | 1 |
| Output Current | 1.50 A |
| Operating Temperature | -40.0 °C to 125 °C |
| Quiescent Current | 65.0 µA |
| REACH SVHC Compliance | No SVHC |
| RoHS | Non-Compliant |
| Number of Pins | 3 |
| Packaging | Reel |
| Output Capacitor Type | Ceramic |
Power Management ICs - PMIC
| Manufacturer | Texas Instruments |
|---|---|
| Manufacturer Part Number | LM337IMP |
| Description | LDO Regulator IC REG LIN NEG ADJ 1A SOT223-4 |
| Stock Code | W022650 |
| Download |  Technical Datasheet |
The LM337IMP is a three terminal adjustable negative voltage regulator in 4 pin SOT-223 package. This regulator is exceptionally easy to apply and requires only two external resistors to set output voltage and one output capacitor for frequency compensation. The circuit design has been optimized for excellent regulation and low thermal transients. The LM137 features internal current limiting, thermal shut down and safe area compensation by making them virtually blowout proof against overloads. This positive voltage regulator is used in wide variety of applications including local on-card regulation, programmable output voltage regulation or precision current regulation.
- Adjustable output voltage from -1.2V to -37V
- 1.5A output current
- Input voltage range from -4.2V to -50V
- Line regulation is typically 0.01%/V
- Load regulation is typically 0.3%
- Excellent thermal regulation of 0.002%/W
- Ripple rejection ratio of 77dB
- Output is short circuit protected
- Operating temperature range -40°C to 125°C
- 50ppm/°C temperature coefficient
Related products
-
Power Management ICs - PMIC
Analog Devices LT6654AHS6-2.5
The LT®6654 is a family of small precision voltage references that offers high accuracy, low noise, low drift, low dropout and low power. The LT6654 operates from voltages up to 36V and is fully specified from –55°C to 125°C. A buffered output ensures ±10mA of output drive with low output impedance and precise load regulation. These features, in combination, make the
LT6654 ideal for portable equipment, industrial sensing and control, and automotive applications. The LT6654 was designed with advanced manufacturing techniques and curvature compensation to provide 10ppm/°C temperature drift and 0.05% initial accuracy. Low thermal hysteresis ensures high accuracy and 1.6ppmP-P noise minimizes measurement uncertainty. Since the LT6654 can also sink current, it can operate as a low power negative voltage reference with the same precision as a positive reference.
The LT6654 references are offered in 6-lead SOT-23 package and an 8-lead LS8 package. The LS8 is a 5mm × 5mm surface mount hermetic package that provides outstanding stability.
SKU: W022312 -
Power Management ICs - PMIC
Analog Devices / Linear Technology LTM8064EY#PBF
The LTM®8064 is a 58VIN, 6A, constant-voltage, constantcurrent (CVCC), step-down µModule® (power module) regulator. Included in the package are the switching controller, power switches, inductor andsupport components. Operating over an input voltage range of 6V to 58V, the LTM8064 supports an output voltage range of 1.2V to 36V. CVCC operation allows the LTM8064 to accurately regulate its output current up to 7A when sourcing and 9.1A when sinking over the entire output range. The output current can be set by a control voltage, a single resistor or a thermistor. To set the switching frequency, simply place a resistor from the RT pin to ground. A resistor from FB to ground will set the output voltage. Only the bulk input and output filter capacitors are needed to finish the design.
Non-Isolated PoL Module DC DC Converter 1 Output 1.2 ~ 36V 6A 6V – 58V Input
SKU: W023610
