The MCP6292-E/MS is a 10MHz rail-to-rail Operational Amplifier provides wide bandwidth for the current. It features a gain bandwidth product (GBWP) and a 65° phase margin. This family also operates from a single supply voltage as low as 2.4V, while drawing 1mA (typical) quiescent current. Additionally, the MCP6291 supports rail-to-rail input and output swing, with a common mode input voltage range of +300mV VDD to -300mV VSS. This family of operational amplifiers is designed with an advanced CMOS process.

• ±3mV Maximum input offset voltage
• 65dB (typical) Common mode rejection ratio
• 70dB Typical power supply rejection ratio

The AD8244BRMZ is a low power FET input quad Unity-gain Buffer designed to isolate very large source impedances from the rest of the signal chain. The 2pA maximum bias current, near zero current noise and 10 TΩ input impedance introduce almost no error, even with source impedance well into the megaohms. Many traditional operational amplifier pinouts have a supply pin that is next to the non-inverting input. A guard trace must be routed between these pins to avoid leakage currents much larger than the bias current of a FET input op amp. The AD8244 solves this problem with unique pinout that physically separates the high impedance inputs from the low impedance supplies and outputs of the other buffers. The AD8244 design is focused on solving problems specific to buffers. This includes close channel-to-channel matching which allows channels of the AD8244 to be used in differential signal chains with minimal error.

• Extremely high input impedance
• Low noise
• High DC precision – 3μV/°C maximum offset drift (B grade)
• No leakage from inputs to supply pins
• Provides guarding capability
• Rail-to-rail output
• Single-supply operation – Input range extends to ground
• 250μA Maximum supply current per amplifier
• 2pA Maximum input bias current at 25°C