| Number of Pins | 5 |
|---|---|
| Lead-Free Status | Contains Lead |
| Lifecycle Status | Active |
| Mounting Style | Surface Mount |
| Dropout Voltage | 800 mV |
| Number of Outputs | 1 |
| Case/Package | TO-263 |
| Current Rating | 3.00 A |
| Number of Regulated Outputs | 1 |
| Output Current | 3.00 A |
| Packaging | Tube |
| Quiescent Current | 5.00 mA |
| REACH SVHC Compliance | No SVHC |
| Output Voltage | 3.30 V |
| Operating Temperature | -40.0 °C to 125 °C |
| RoHS | Compliant |
| Output Capacitor Type | Ceramic |
| Input Voltage (DC) | 7.00 V (max) |
Power Management ICs - PMIC
| Manufacturer | Texas Instruments |
|---|---|
| Manufacturer Part Number | LP3963ES-3.3/NOPB |
| Description | Regülatör 3.3v 3A TO-263 |
| Stock Code | W011855 |
| Download |  Technical Datasheet |
The LP3963ES-3.3/NOPB is a 3.3V fixed output fast ultra-low-dropout (LDO) Linear Regulator operate from a 2.5 to 7V input supply. This device respond very fast to step changes in load which makes them suitable for low voltage microprocessor applications. The device is developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the device to operate under extremely low-dropout (LDO) conditions. The dropout voltage is typically 80mV at 300mA load current and 800mV at 3A load current.
- Low ground pin current
- 0.06% Load regulation
- 15µA Quiescent current in shutdown mode
- ±1.5% Output voltage accuracy
- ERROR flag indicates output status
- Minimum output capacitor requirements
- Overtemperature and overcurrent protection
Related products
-
Power Management ICs - PMIC
Infineon IFX78M05ABTFATMA1
The IFX78M05 monolithic 3-terminal positive voltage regulator employs internal current-limiting, thermal shutdown and safe-area compensation, making it extremely robust. The IFX78M05 is available in a fixed 5V version and is capable of delivering an output current of 0.5 A. This regulator can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. This linear voltage regulator is designed for a wide variety of applications and suitable for use in harsh environments. The short-circuit current limit, limits the output current of the device. The safe-area protection feature limits the internal power dissipation, in case the internal power dissipation becomes too high, the thermal shutdown implemented prevents the device from overheating. The 5V voltage regulator is available in the TO-252 package.
- 500 mA Output Current Capability
- High Input Voltage Range: up to 35 Volts
- Available in Fixed 5V Output Voltage Version
- Wide temperature range Tj
- -40 °C to +125 °C
- Over temperature Protection
- Short Circuit Current Limit
- Safe-Area Protection
- Thermally Optimized Packages
- Green Product (RoHS compliant)
SKU: W004544 -
Power Management ICs - PMIC
Texas Instruments TPS27081ADDCR
The TPS27081ADDCR is a high-side Load Switch features industry-standard ESD protection on all pins providing better ESD compatibility with other on board components. The TPS27081A level shifts ON/OFF logic signal to VIN levels and supports as low as 1-V CPU or MCU logic to control higher voltage power supplies without requiring an external level-shifter. Switching a large value output capacitor CL through a fast ON/OFF logic signal may result in an excessive inrush current. To control the load inrush current, connect a resistor R2 and add an external capacitor C1 as shown in the Simplified Schematic in the Technical Data Sheet. To configure the TPS27081A to achieve a specific slew rate, refer to the Application and Implementation section. A single pull-up resistor R1 is required in standby power switch applications. In such applications connect the R2 pin of the TPS27081A to the system ground when inrush current control is not required.
- Adjustable turn-on and turnoff slew rate control through external R1, R2 and C1
- Supports a wide range of 1.2 to 8V supply inputs
- Integrated NMOS for PFET control
- Full ESD protection (all pins)
- Low ON-resistance, high-current PFET
- Ultralow leakage current in standby (typical 100nA)
SKU: W008212 -
Power Management ICs - PMIC
Texas Instruments 78SR105HC
Non-Isolated Step-Down (Buck) Power Modules, PTN, PTR, PTV, TPS Series, Texas Instruments
A range of PCB-mounting Step-down (Buck) switching voltage regulator modules from Texas Instruments. These products offer highly efficient space-saving solutions for low-power step-down DC-DC applications where isolation is not required.
SKU: W002899 -
Power Management ICs - PMIC
Texas Instruments LM337IMP
The LM337IMP is a three terminal adjustable negative voltage regulator in 4 pin SOT-223 package. This regulator is exceptionally easy to apply and requires only two external resistors to set output voltage and one output capacitor for frequency compensation. The circuit design has been optimized for excellent regulation and low thermal transients. The LM137 features internal current limiting, thermal shut down and safe area compensation by making them virtually blowout proof against overloads. This positive voltage regulator is used in wide variety of applications including local on-card regulation, programmable output voltage regulation or precision current regulation.
- Adjustable output voltage from -1.2V to -37V
- 1.5A output current
- Input voltage range from -4.2V to -50V
- Line regulation is typically 0.01%/V
- Load regulation is typically 0.3%
- Excellent thermal regulation of 0.002%/W
- Ripple rejection ratio of 77dB
- Output is short circuit protected
- Operating temperature range -40°C to 125°C
- 50ppm/°C temperature coefficient
SKU: W022650
