| Packaging | Cut Tape (CT), Reel, Tape & Reel (TR) |
|---|---|
| Mounting Style | Surface Mount |
| Number of Circuits | 1 |
| Number of Gates | 1 |
| Number of Bits | 1 |
| Lead-Free Status | Lead Free |
| Lifecycle Status | Active |
| Operating Temperature | -40.0 °C to 85.0 °C |
| Output Current Drive | -1.00 mA |
| Output Current | 32.0 mA |
| REACH SVHC Compliance | No SVHC |
| RoHS | Compliant |
| Number of Pins | 5 |
| Supply Voltage (DC) | 5.50 V (max), 1.65 V (min) |
| Quiescent Current | 10.0 µA (max) |
| Propagation Delay Max (tpd) | 3.70 ns |
| Case/Package | SOT-23 |
Logic
| Manufacturer | Texas Instruments |
|---|---|
| Manufacturer Part Number | SN74LVC1G04DBVR |
| Description | IC SINGLE INVERTER-GATE SOT-23-5 |
| Stock Code | W006356 |
| Download |  Technical Datasheet |
The SN74LVC1G04DBVR is a single inverter gate IC, designed for 1.65 to 5.5V VCC operation. The device performs the Boolean function Y = A. The CMOS device has high output drive while maintaining low static power dissipation over a broad VCC operating range.
- Supports 5V VCC Operation
- Input Accepts Voltage up to 5.5V Allowing Down Translation to VCC
- 3.3ns at 3.3V Maximum Propagation Delay Time
- Low-power Consumption, 10µA Maximum ICC
- ±24mA Output Drive at 3.3V
- Ioff Supports Live-insertion, Partial-power-down Mode and Back-drive Protection
- Latch-up Performance Exceeds 100mA Per JESD 78, Class II
- Green Product, No Sb/Br
Related products
-
Logic
NXP Semiconductors 74HC74N
The 74HC74N is a dual D-type positive-edge-triggered Flip-flop with clear and preset. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements are transferred to the outputs on the positive-going edge of the clock (CLK) pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of CLK. Following the hold-time interval, data at the D-input can be changed without affecting the levels at the outputs.
- Wide operating voltage range
- Outputs can drive up to 10 LSTTL loads
- Low power consumption
- 15ns Typical TPD
- ±4mA Output drive at 5V
SKU: W002902 -
Logic
Texas Instruments SN74LVC1T45DCKT
The SN74LVC1T45DCKT is a single-bit non-inverting Bus Transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 to 5.5V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 to 5.5V. This allows for universal low-voltage bidirectional translation between any of the 1.8, 2.5, 3.3 and 5V voltage nodes. It is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic HIGH or LOW level applied to prevent excess ICC and ICCZ. It is designed so that the DIR input is powered by VCCA.
- Fully configurable dual-rail design allows each port to operate over 1.65 to 5.5V power supply range
- VCC Isolation Feature, If Either VCC Input Is at GND, Both Ports Are in High-Impedance State
- DIR Input Circuit Referenced to VCCA
- Low-power Consumption, 4µA Maximum ICC
- ±24mA Output Drive at 3.3V
- Ioff Supports Partial-power-down Mode Operation
- 420Mbps(3.3 to 5V Translation) 210Mbps(Translate to 3.3V), 75Mbps (Translate to 1.8V) max data rates
- Latch-up Performance Exceeds 100mA Per JESD 78, Class II
- Green Product, No Sb/Br
SKU: W001913 -
Logic
Texas Instruments SN74HC112N
The SN74HC112N is a dual negative-edge-triggered J-K Flip-flop with clear and preset. A low level at the preset (PRE\) or clear (CLR\) inputs sets or resets the outputs, regardless of the levels of the other inputs. When PRE\ and CLR\ are inactive (high), data at the J and K inputs meeting the setup time requirements are transferred to the outputs on the negative-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the fall time of the CLK pulse. Following the hold-time interval, data at the J and K inputs may be changed without affecting the levels at the outputs. This versatile flip-flop performs as toggle flip-flop by tying J and K high.
- Outputs can drive up to 10 LSTTL loads
- 13ns Typical tpd
- ±4mA Output drive at 5V
- 1µA Maximum low input current
- 40µA Maximum low power consumption
SKU: W007161 -
Logic
Texas Instruments SN74LVC1G332DBVR
The SN74LVC1G332DBVR is a single 3-input positive-OR Gate. The device performs the Boolean function in Y = A + B + C or (A\ • B\ • C\)\ positive logic. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
- ±24mA Output drive at 3.3V
- 10µA Maximum ICC low power consumption
- Inputs accept voltages to 5.5V
- Maximum tpd of 4.5ns at 3.3V
- Ioff supports live insertion, partial power down mode and back drive protection
- Supports down translation to VCC
- ESD protection exceeds JESD 22
- Latch-up performance exceeds 100mA per JESD 78, Class II
- Green product and no Sb/Br
SKU: W006358
