Power Dissipation | 85.0 mW (max) |
---|---|
Power Consumption | 85.0 mW |
RoHS | Compliant |
Sample Rate | 40.0 MHz |
Supply Voltage (DC) | 4.75 V (min), 5.25 V (max) |
Supply Current | 17.0 mA |
Number of Pins | 24 |
Packaging | Tube, Rail |
Lead-Free Status | Lead Free |
Case/Package | TSSOP |
Lifecycle Status | Active |
Mounting Style | Surface Mount |
Operating Temperature | 85.0 °C (max) |
Number of Bits | 8 |
Manufacturer | Texas Instruments |
---|---|
Manufacturer Part Number | TLC5540IPW |
Description | ADC TLC5540IPW PW |
Stock Code | W011862 |
Download | ![]() |
The TLC5540 is a high-speed, 8-bit analog-to-digital converter (ADC) that converts at sampling rates up to 40 megasamples per second (MSPS). Using a semiflash architecture and CMOS process, the TLC5540 is able to convert at high speeds while still maintaining low power consumption and cost. The analog input bandwidth of 75 MHz (typ) makes this device an excellent choice for undersampling applications. Internal resistors are provided to generate 2-V full-scale reference voltages from a 5-V supply, thereby reducing external components.
The digital outputs can be placed in a high impedance mode. The TLC5540 requires only a single 5-V supply for operation.
Related products
-
Data & Signal Conversion
Texas Instruments ADS1015IDGST
0 out of 5(0)The ADS1015IDGST is a Precision Analogue-to-digital Converter (ADC) with 12 bits of resolution. Designed with precision, power and ease of implementation in mind. It features an onboard reference and oscillator. Data are transferred via an I²C-compatible serial interface, four I²C slave addresses can be selected. It operates from a single power supply ranging from 2.0 to 5.5V. It can perform conversions at rates up to 3300 samples per second (SPS). An onboard PGA is available, that offers input ranges from the supply to as low as ±256mV, allowing both large and small signals to be measured with high resolution. Also features an input multiplexer (MUX) that provides two differential or four single-ended inputs. It operates either in continuous conversion mode or a single-shot mode that automatically powers down after a conversion and greatly reduces current consumption during idle periods.
- Low current consumption 128SPS to 3.3kSPS Programmable data rate
- Internal low-drift voltage reference
- Internal oscillator
- Internal PGA
- I²C Interface, pin-selectable addresses
- Four single-ended or two differential inputs
- Programmable comparator
SKU: W004545 -
Data & Signal Conversion
Analog Devices AD7994BRUZ-0
0 out of 5(0)The MAX11626EEE+ is a 12bit analogue to digital converter (ADC) with FIFO and internal reference in 16 pin QSOP package. This device has on-chip FIFO, scan mode, internal clock mode, internal averaging and AutoShutdown function. The MAX11626 has four input channels and maximum sampling rate is 300Ksps using an external clock. It includes 10MHz SPI/QSPI/MICROWIRE compatible serial port. This ADC is used in system supervision, data acquisition systems and data logging systems.
- Supply voltage range from 4.75V to 5.25V
- Operating temperature range from -40°C to 85°C
- Analogue multiplexer with track/hold function
- Internal reference voltage of 4.096V
- 1V to VDD external reference
- 16 entry first-in/first-out (FIFO)
- Integral nonlinearity (INL) of ±1LSB
- Differential nonlinearity (DNL) of ±1LSB (no missing codes over temperature)
- Offset error of ±0.5LSB and gain error of ±0.5LSB
- Full power bandwidth of 1MHz (-3dB point)
SKU: W004189 -
Data & Signal Conversion
Microchip RN131G-I/RM
0 out of 5(0)RN131G-I/RM is a ultra low power WiFi 802.11 b/g surface mount module with on board antenna and U. FL connector. The WiFi module incorporates a 2.4GHz radio, processor, TCP/IP stack, real time clock, crypto accelerator, power management, and analog sensor interfaces. The module is preloaded with software to simplify integration and minimize application development. In the simplest configuration, the hardware requires only four connections (PWR, TX, RX, and GND) to create a wireless data connection. Additionally, the sensor interface provides temperature, audio, motion, acceleration, and other analog data without requiring additional hardware. The module is programmed and controlled with a simple ASCII command language. Once the module is set up, it can scan to find an access point, associate, authenticate, and connect over any WiFi network.
- Ultra low power with 4uA sleep, 40mA Rx, 210mA Tx
- High throughput, 1Mbps sustained data rate with TCP/IP and WPA2
- Small, compact surface mount module
- On board ceramic chip antenna and U. FL connector for external antenna
- UART hardware interface
- 10 general purpose digital I/O pins, 8 analog sensor interfaces
- Real time clock for wakeup and time stamping
- Accepts 3.3V regulated or 2V to 3V battery
- On board ECOS -OS, TCP/IP stacks
- Industrial grade temperature (-30°C to 85°C)
SKU: W005653 -
Data & Signal Conversion
Analog Devices / Linear Technology LTC2309HF#PBF
0 out of 5(0)The LTC2309HF#PBF is a 8-channel 12-bit SAR Analog-to-digital Converter (ADC) with I²C compatible serial interface. This ADC includes an internal reference and a fully differential sample-and-hold circuit to reduce common mode noise. The ADC operates from an internal clock to achieve a fast 1.3µs conversion time. It operates from a single 5V supply and draws just 300µA at a throughput rate of 1ksps. The ADC enters nap mode when not converting, reducing the power dissipation. The low power consumption and small size make the ADC ideal for battery-operated and portable applications, while the 2-wire I²Ccompatibleserialinterfacemakes this ADC a good match for space-constrained systems.
- Guaranteed no missing codes
- Internal reference
- Internal 8-channel multiplexer
- Internal conversion clock
SKU: W004190