| Output Current | 150 mA |
|---|---|
| Lead-Free Status | Lead Free |
| Mounting Style | Surface Mount |
| Number of Outputs | 1 |
| Lifecycle Status | Active |
| Dropout Voltage | 30.0 mV |
| Input Voltage (DC) | 5.50 V (max) |
| Number of Regulated Outputs | 1 |
| Output Capacitor Type | Ceramic |
| Operating Temperature | -40.0 °C to 85.0 °C |
| Quiescent Current | 400 µA |
| REACH SVHC Compliance | No SVHC |
| Output Voltage | 1.80 V |
| RoHS | Compliant |
| Number of Pins | 5 |
| Packaging | Cut Tape (CT), Reel, Tape & Reel (TR) |
| Case/Package | SOT-23 |
Power Management ICs - PMIC
| Manufacturer | Texas Instruments |
|---|---|
| Manufacturer Part Number | TPS73118DBVT |
| Description | IC REG LDO 1.8V 0.15A SOT23-5 |
| Stock Code | W004331 |
| Download |  Technical Datasheet |
The TPS73118DBVT is a 1.8V fixed output low-dropout (LDO) Linear Regulator with reverse current protection uses a new topology, an NMOS pass element in a voltage-follower configuration. This topology is stable using output capacitors with low equivalent series resistance (ESR) and even allows operation without a capacitor. The device also provides high reverse blockage (low reverse current) and ground pin current that is nearly constant over all values of output current. The device uses an advanced BiCMOS process to yield high precision while delivering very low-dropout (LDO) voltages and low ground pin current. Current consumption, when not enabled, is less than 1µA and ideal for portable applications. The extremely low output noise is ideal for powering VCOs. These devices are protected by thermal shutdown and fold-back current limit.
- Stable with or without capacitors of all types
- Excellent load transient response-with or without optional output capacitor
- New NMOS topology provides low reverse leakage current
- 30µVrms Low noise (10kHz to 100kHz)
- 0.5% Initial accuracy
- 1% Overall accuracy over line, load and temperature
- <1µA Quiescent current (IQ) in shutdown mode
- Thermal shutdown and specified minimum and maximum current limit protection
- Green product and no Sb/Br
Related products
- Power Management ICs - PMIC
Texas Instruments LM337T
The LM337T is an adjustable 3-terminal Negative Voltage Regulator, capable of supplying in excess of -1.5A over an output voltage range of -1.2V to -37V. This regulator is exceptionally easy to apply, requiring only 2 external resistors to set the output voltage and 1 output capacitor for frequency compensation. The circuit design has been optimized for excellent regulation and low thermal transients. Further, the LM137 series features internal current limiting, thermal shutdown and safe-area compensation, making them virtually blowout-proof against overloads. The LM337T serves a wide variety of applications including local on-card regulation, programmable-output voltage regulation or precision current regulation. The LM337T is ideal complements to the LM117/LM317 adjustable positive regulators.
- Output voltage adjustable from -1.2 to -37V
- 1.5A Output current specified, -55 to +150°C
- Line regulation typically 0.01%/V
- Load regulation typically 0.3%
- 0.002%/W Excellent thermal regulation
- 77dB Ripple rejection
- Excellent rejection of thermal transients
- 50ppm/°C Temperature coefficient
- Temperature-independent current limit
- Internal thermal overload protection
SKU: W012316 - Power Management ICs - PMIC
Texas Instruments TPS767D301PWP
The TPS767D301PWP is a Dual-output Low-dropout (LDO) Voltage Regulator that offers fast transient response, low dropout voltages, dual outputs and incorporating stability with 10µF low ESR output capacitors. The TPS767D301 dual voltage regulator is designed primarily for DSP applications. This device can be used in any mixed-output voltage application, with each regulator supporting up to 1A. Dual active-low reset signals allow resetting of core-logic and I/O separately. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85µA over the full range of output current, 0mA to 1A). These two key specifications yield a significant improvement in operating life for battery-powered systems.
- Dual output voltages for split-supply applications
- Output current range of 0mA to 1.0A per regulator
- 3.3/2.5, 3.3/1.8 and 3.3V/Adjustable output
- Fast-transient response
- 2% Tolerance over load and temperature
- 350mV Typical dropout voltage at 1A
- Ultra-low 85µA typical quiescent current
- 1µA Quiescent current during shutdown
- Dual open-drain power-on reset with 200ms delay for each regulator
- Thermal shutdown protection for each regulator
SKU: W007713 - Power Management ICs - PMIC
Infineon BSP772TXUMA1
The BSP772T is a N-channel high-side vertical power FET Switch with charge pump, ground referenced CMOS compatible input and monolithically integrated in smart SIPMOS technology. It is providing embedded protective functions and it is CMOS compatible input.
- Overload protection
- Current limitation
- Short-circuit protection
- Thermal shutdown with restart
- Overvoltage protection
- Fast demagnetization of inductive loads
- Reverse battery protection with external resistor
- Loss of GND and loss of VBB protection
- ESD protection
- Very low standby current
SKU: W003745 - Power Management ICs - PMIC
Texas Instruments LM338T/NOPB
The LM338T/NOPB is an adjustable 3-terminal positive Voltage Regulator, capable of supplying in excess of 5A over a 1.2 to 32V output range. They are exceptionally easy to use and require only 2 resistors to set the output voltage. Careful circuit design has resulted in outstanding load and line regulation-comparable to many commercial power supplies. A unique feature of the LM338T/NOPB family is time-dependent current limiting. The current limit circuitry allows peak currents of up to 12A to be drawn from the regulator for short periods of time. This allows the LM338T/NOPB to be used with heavy transient loads and speeds start-up under full-load conditions. Under sustained loading conditions, the current limit decreases to a safe value protecting the regulator.
- Specified Thermal Regulation
- Current Limit Constant with Temperature
- P+ Product Enhancement Tested
- Output is Short-circuit Protected
- Green Product, No Sb/Br
SKU: W000346 - Power Management ICs - PMIC
Texas Instruments LP3963ES-3.3/NOPB
The LP3963ES-3.3/NOPB is a 3.3V fixed output fast ultra-low-dropout (LDO) Linear Regulator operate from a 2.5 to 7V input supply. This device respond very fast to step changes in load which makes them suitable for low voltage microprocessor applications. The device is developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the device to operate under extremely low-dropout (LDO) conditions. The dropout voltage is typically 80mV at 300mA load current and 800mV at 3A load current.
- Low ground pin current
- 0.06% Load regulation
- 15µA Quiescent current in shutdown mode
- ±1.5% Output voltage accuracy
- ERROR flag indicates output status
- Minimum output capacitor requirements
- Overtemperature and overcurrent protection
SKU: W006996
