The RPA30-2405SAW/P from Recom Power is a RPA30-AW series 30W single output DC to DC converter with positive control function. This high power density converter has 4:1 wide input voltage range and industry standard 1″x1″ case size. Despite its small size, the RPA30-AW converter is fully specified device with high efficiency, no minimum load, 1600VDC isolation, tight regulation and low ripple/noise figures. This single output DC to DC converter offers a ±10% trim range. The outputs are also fully protected against overtemperature, short circuits, overcurrent and overvoltage. The converter finds many uses in railway applications where board space is at a premium. It has Pi-Type internal input filter.

• Input voltage range from 9VDC to 36VDC (24VDC nominal input voltage)
• Output voltage of 5VDC and output current of 6000mA
• Input current of 1450mA
• Efficiency of 89% and maximum capacitive load of 10000µF
• Maximum line regulation of ±0.2%
• Load regulation of ±0.2%
• Start-up time of 8ms (power-up, CTRL ON/OFF) and internal operating frequency of 550KHz
• Ripple and noise of 50mVp-p and maximum output accuracy of ±2.0%
• Minimum isolation resistance of 10Mohm and typical isolation capacitance of 1100pF
• Maximum case temperature of 105°C

• Rugged Design for Industrial Applications
• DC OK 24 V Models
• Up to 92% Efficiency
• Wide Input Range
• Wide Adjustment Range
• International Safety Approvals
• Full Power to +60°C
• Overvoltage and Overload Protection