| Size-Height | 10.2 mm |
|---|---|
| Power Rating | 30.0 W |
| Supply Voltage (DC) | 24.0 V |
| Output Voltage | 5.00 V |
| REACH SVHC Compliance | No SVHC |
| Size-Width | 40.6 mm |
| RoHS | Compliant |
| Output Power | 30.0 W (max) |
| Number of Outputs | 1 |
| Input Voltage (DC) | 10.0 V to 40.0 V |
| Output Current | 6.00 A |
| Isolation Voltage | 1.50 kV |
| Operating Temperature | -40.0 °C (min) |
| Mounting Style | Through Hole |
Power Suppy & Line Protection
| Manufacturer | Tracopower |
|---|---|
| Manufacturer Part Number | TEN 30-2411WI |
| Description | 5V 6A 30 Watt, Single Output, DC DC Converter |
| Stock Code | W004205 |
| Download |  Technical Datasheet |
The TEN 30-2411WI is a high performance 30W DC-DC Converter featuring ultra wide 4:1 input voltage range of 10 to 40VDC and 5VDC output with industry-standard footprint. A very high efficiency allows operating temperatures up to 85°C. A built-in filter for both input and output minimizes the need for external filtering. Further standard features include 5VDC output voltage, remote ON/OFF, output voltage trimming, overvoltage protection and under-voltage lockout and short-circuit protection. This device is suitable for use in battery operated equipment and many applications where isolated, tightly regulated voltages are required and space is limited on the PCB.
- Under voltage lockout
- Shielded metal case with insulated base plate
- 87% Typical efficiency
- 24VDC Nominal input voltage
Related products
-
Power Suppy & Line Protection
Vicor VI-JT3-EX
The VI-J00 MiniMod family established a new standard in component-level DC-DC converters. This “junior” size complement to the higher power VI-200 family offers up to 100W of isolated and regulated power in a board mounted package. With thousands of input/output/power combinations, and with a maximum operating temperature rating of 100°C, the MiniMod provides nearly unlimited flexibiliy for power system designers to meet demanding time to market requirements.
Utilizing Vicor’s “zero-current-switching” forward converter technology, proven by an installed base of over 8 million units, the MiniMod family combines state of the art power density with the
SKU: W005262 -
-
Power Suppy & Line Protection
Recom Power RPA30-2405SAW/P
The RPA30-2405SAW/P from Recom Power is a RPA30-AW series 30W single output DC to DC converter with positive control function. This high power density converter has 4:1 wide input voltage range and industry standard 1″x1″ case size. Despite its small size, the RPA30-AW converter is fully specified device with high efficiency, no minimum load, 1600VDC isolation, tight regulation and low ripple/noise figures. This single output DC to DC converter offers a ±10% trim range. The outputs are also fully protected against overtemperature, short circuits, overcurrent and overvoltage. The converter finds many uses in railway applications where board space is at a premium. It has Pi-Type internal input filter.
- Input voltage range from 9VDC to 36VDC (24VDC nominal input voltage)
- Output voltage of 5VDC and output current of 6000mA
- Input current of 1450mA
- Efficiency of 89% and maximum capacitive load of 10000µF
- Maximum line regulation of ±0.2%
- Load regulation of ±0.2%
- Start-up time of 8ms (power-up, CTRL ON/OFF) and internal operating frequency of 550KHz
- Ripple and noise of 50mVp-p and maximum output accuracy of ±2.0%
- Minimum isolation resistance of 10Mohm and typical isolation capacitance of 1100pF
- Maximum case temperature of 105°C
SKU: W022208
