| Size-Width | 22.5 mm |
|---|---|
| RoHS | Compliant |
| Weight | 150 g |
| REACH SVHC Compliance | No SVHC |
| Size-Height | 88.5 mm |
| Supply Voltage (DC) | 264 V |
| Size-Length | 115 mm |
| Power Rating | 18.0 W |
| Output Current | 3.00 A |
| Mounting Style | DIN Rail |
| Output Voltage | 5.00 V |
| Number of Outputs | 1 |
| Output Power | 15.0 W (max) |
| Operating Temperature | -10.0 °C (min) |
Power Suppy & Line Protection
| Manufacturer | XP Power |
|---|---|
| Manufacturer Part Number | DNR18US05 |
| Description | DIN RAIL, 1 O/P, 18W, 3A, 5V |
| Stock Code | W004289 |
| Download |  Technical Datasheet |
- Rugged Design for Industrial Applications
- DC OK 24 V Models
- Up to 92% Efficiency
- Wide Input Range
- Wide Adjustment Range
- International Safety Approvals
- Full Power to +60°C
- Overvoltage and Overload Protection
Related products
-
Power Suppy & Line Protection
Vicor VI-JT3-EX
The VI-J00 MiniMod family established a new standard in component-level DC-DC converters. This “junior” size complement to the higher power VI-200 family offers up to 100W of isolated and regulated power in a board mounted package. With thousands of input/output/power combinations, and with a maximum operating temperature rating of 100°C, the MiniMod provides nearly unlimited flexibiliy for power system designers to meet demanding time to market requirements.
Utilizing Vicor’s “zero-current-switching” forward converter technology, proven by an installed base of over 8 million units, the MiniMod family combines state of the art power density with the
SKU: W005262 -
Power Suppy & Line Protection
Recom Power RPA30-2405SAW/P
The RPA30-2405SAW/P from Recom Power is a RPA30-AW series 30W single output DC to DC converter with positive control function. This high power density converter has 4:1 wide input voltage range and industry standard 1″x1″ case size. Despite its small size, the RPA30-AW converter is fully specified device with high efficiency, no minimum load, 1600VDC isolation, tight regulation and low ripple/noise figures. This single output DC to DC converter offers a ±10% trim range. The outputs are also fully protected against overtemperature, short circuits, overcurrent and overvoltage. The converter finds many uses in railway applications where board space is at a premium. It has Pi-Type internal input filter.
- Input voltage range from 9VDC to 36VDC (24VDC nominal input voltage)
- Output voltage of 5VDC and output current of 6000mA
- Input current of 1450mA
- Efficiency of 89% and maximum capacitive load of 10000µF
- Maximum line regulation of ±0.2%
- Load regulation of ±0.2%
- Start-up time of 8ms (power-up, CTRL ON/OFF) and internal operating frequency of 550KHz
- Ripple and noise of 50mVp-p and maximum output accuracy of ±2.0%
- Minimum isolation resistance of 10Mohm and typical isolation capacitance of 1100pF
- Maximum case temperature of 105°C
SKU: W022208 -
Power Suppy & Line Protection
Murata Power Solutions NME0505SC
The NME0505SC from Murata is an isolated, 1W, single output DC to DC converter in SIP package. It is particularly suited to isolate or converting DC power rails. The galvanic isolation allows the device to configure an isolated negative rail in systems where only positive rails exist.
The NME series of DC-DC Converters is particularly suited to isolating and/or converting DC power rails. The galvanic isolation allows the device to be configured to provide an isolated negative rail in systems where only positive rails exist. The wide temperature range guarantees startup from –40°C and full 1 watt output at 85°C2 . For lower ripple, refer to output ripple reduction section.
The NME series offers short circuit protection options (PC) across the operating temperature range. Short circuits of less than 1Ω cause the converter to enter a ‘foldback’ limiting mode such that the input current is approximately 95mA for 0505 variant. Protection is continuous and auto-resetting on removal of the short circuit
SKU: W000006 -
Power Suppy & Line Protection
Tracopower TEN 25-2412
5W & 30W single/dual output regulated isolated DC-DC converter modules with a high power density and input voltage range. These regulated isolated DC-DC converter modules have a high efficiency which enables a safe operating temperature range of -40°C to +71°C. Typical applications for these regulated isolated DC-DC converters include industrial electronics, battery operated equipment and distributed power systems.
SKU: W003978
