| Size-Height | 11.1 mm |
|---|---|
| Size-Width | 9.20 mm |
| RoHS | Compliant |
| REACH SVHC Compliance | No SVHC |
| Packaging | Tube |
| Output Power | 6.00 W (max) |
| Mounting Style | Through Hole |
Power Suppy & Line Protection
| Manufacturer | XP Power |
|---|---|
| Manufacturer Part Number | ITX2403SA |
| Description | 18-36V Input, 3V3 1.3A 6W Output DC DC Converter |
| Stock Code | W001012 |
| Download |  Technical Datasheet |
The ITX series is a isolated 6W DC-DC Converter with fully regulated single and dual outputs.
- 2:1 Input range
- 1500VDC Isolation
- SIP8 Plastic Case
- Operating Temperature -40°C to 90°C
- Single and Dual Outputs
Related products
-
Power Suppy & Line Protection
Murata Power Solutions OKL-T/6-W12N-C
The OKL-T/6-W12 series are miniature non-isolated PoL SMT DC/DC Power Converters for embedded applications. Featuring inspectable Land Grid Array ( iLGA) format, the OKL-T/6-W12N-C measures only 12.2 x 12.2 x 7.2mm maximum. Based on fixed-frequency synchronous buck converter switching topology, the high power conversion efficient point-of-load (PoL) module features programmable output voltage and on/off control. This converter also include under-voltage lock out (UVLO), output short-circuit protection and over-current protections. An optional sequence/tracking feature on OKL-T/6-W12N-C allows power sequencing of PoLs.
- iLGA inspectable Land Grid Array
- Programmable output voltage from 0.591 to 5.5VDC
- Drives up to 300μF ceramic capacitive loads
- High power conversion efficiency at 93%
- Outstanding thermal derating performance
- Short-circuit and over-current protection
- On/off control and power good signal
SKU: W007273 -
Power Suppy & Line Protection
TDK-Lambda SWS600-24
The SWS600-24 is a 24V/600W 1-output general purpose enclosed Power Supply with active power factor correction and internal fan cooling. Greater than 105%, constant current style over-current protection. SWS300-series supports global use, greater reliability and assists system compliance. This power supply output is fixed and can be adjustable.
- Universal input
- Level-B EMI
- 150mV Ripple and noise
- 81/84% Efficiency
- -10 to 65°C Operating temperature range
SKU: W005317 -
-
Power Suppy & Line Protection
Vicor VI-J43-CX
A range of board-mount AC front-end modules is available for the design of a full AC-DC power system. Global, autoranging input ranges are available from 85 to 264 Vac at 47 to 63 Hz.
The isolated, power factor corrected devices integrate EMI/RFI filtering, transient protection, short circuit protection and inrush limiting to simplify design. These building block components enable high-density power solutions (from 330 W to 1500 W), meeting necessary worldwide standards, including compliance to EMC standards for harmonic currents, line disturbance and transient conducted emissions.
SKU: W003133
